Publicidad
Idiomas disponibles
Idiomas disponibles
1
PREPARE YOUR IRONING BOARD
POSITIONING
When setting up the ironing board please note the following:
•
Place the ironing board on a flat, even, dry surface, near an
earthed power socket
•
Position the ironing board securely so that nobody can knock it
over or get hurt.
•
Never put the appliance on or near warm surfaces or near flames
•
Use the appliance indoors only.
•
To avoid scalding, keep the appliance away from children.
•
Use only the correct extension cables in accordance with the
INSTRUCTION FOR USE IB40/C ECO PLUS
advice given on page 2,3,4,5; pay attention not to trip over the
cord.
Put up the ironing board as follows:
•
Place the ironing board upright on the floor (folded shelf end
downward).
•
Hold the end of the ironing board with one hand.
•
With the other hand hold the upper part of the ironing board legs.
•
Firmly pull the ironing board
wide apart (1.) until the
adjustment height device locks
in place (2.).
•
Place the ironing board in a
horizontal position (3.).
•
Unfold the shelf as shown here.
1 1
Insert the iron cord support in one of the small holes on
each side of the ironing board and hang the iron steam
cord. The iron cord support keeps the iron cord away
from the surface of the board while ironing to avoid
the cord moving or dragging the garment. The iron cord
support also prevents "wear and tear" of the iron cord
due to rubbing against the edges or surface of the board.
8
Before Use
3
2
Note: Be careful that
the feet of the ironing
board don't slip on
smooth floors while
opening/closing
ironing board.
the
Publicidad
