COMETA Foxydry Vivo Manual De Instrucciones página 22

BLOWING FUNCTION
The blowing function allows you to iron on a pillow of air without
applying downward pressure. This makes ironing of delicate items,
or difficult areas (trousers folds, pockets, seams, difficult areas to
reach), much easier and avoids the visible signs or seam crushing.
• For the blowing function set the selector switch on position "II" (5).
• With the switch in position "0", the blowing function is switched off.
4
AFTER IRONING
• After use, leave the board open for 10 minutes to dry the cover
and to avoid the formation of condensation in the board.
• Turn off the ironing board using the power on/off switch. (1)
• Remove the plug from the socket (9).
• Let the equipment cool completely.
• Remove the iron cord support.
• Place the iron on the iron rest pad.
• Unplug the iron/steam generator from the auxillary socket and
remove it from the board.
• Fold the shelf back over the ironing surface.
• Wrap the power supply cord around two
cord supports beneath the board.
• Hold the board leg with your foot to stop it skidding.
• Operate the height adjustment lever and close the board.
Note: do not entangle the power cord. Store the closed board in a
vertical position with the folded shelf end towards the floor. Always
ensure that the board does not skid and tilt. Store the appliance in
a dry place and out of reach of the children.
10
Starting the Appliance - Shutdown Operations