Publicidad
Idiomas disponibles
Idiomas disponibles
Before first use
Check the product and scope of delivery
NOTE!
If opening the packaging with a sharp knife or other pointed
object, be careful to avoid damaging the product's surface.
- Proceed carefully with opening the packaging.
1. With both hands, lift the product out of the packaging.
2. Check that the delivery is complete (see chapter "Scope of delivery/unit parts").
3. Inspect the product and individual parts for damage. Do not operate a damaged
product, instead, contact the manufacturer via the service center listed on the
warranty card.
Initial cleaning of the product
1. Remove the packaging and all protective film, if present.
2. Clean all parts of the delivery as described in the "Cleaning" section.
The product is clean and ready for use.
Set up the product and heat it up for the first time
Place the product on an easily accessible, level, dry, heat-resistant and sufficiently
stable work surface. The rubber feet on the underside ensure a secure hold here.
1. Connect the power plug to the mains.
The on/off switch 23 lights up.
2. Press the on/off switch 23 .
On the control panel 1 all the elements light up.
3. Press the Toggle temperature / time button 17 .
The temperature indicator 16 flashes.
4. Set a temperature of 200 °C by pressing the button Increase temperature / time 19
or the button Reduce temperature / time 15 .
5. Press the button Toggle temperature / time 17 .
The time display 18 flashes.
6. Set a time of 15 minutes by pressing the Temperature / Time button 19 or the
Temperature / Time Reduction button 15 .
Risk of damage!
90
Publicidad
