Publicidad
Idiomas disponibles
Idiomas disponibles
jack 3.5mm
TRANSMITTER CONTROLS
3.5mm Plug: plug into the 3.5mm jack of the device
Indicator: indicate the conditions of connection and
battery level
Type-C charging port: insert the USB-C charging
cable to recharge the transmitter
Power on/o : press the power button for 3 seconds,
the headset will powered on/o automatically
LED INDICATORS (headphones and transmitter)
·LIndicator ashing blue - Pairing
·Blue light will be constant - Paired
·Indicator solid red - Charging
·Indicator ashing red - Low Battery
PAIRING THE HEADPHONES AND TRANSMITTER
Hold the power button on the headphones and transmitter for 3 seconds to turn them on and o . The headphones will automatically pair with the
transmitter.
CHARGING THE HEADPHONES AND TRANSMITTER
When the headphones/transmitter are charged through charging cable, the indicator light will glow solid red.
When the Headphones/transmitter are fully charged, the indicator light turn o .
If the battery of headphones/transmitter is low, the indicator light will ash red. Please charge in time.
The cable has to be checked regularly to verify eventual damages. If it is damaged, please do not use it and replace it. Recharge the product only
using the cable included.
Only for indoor use, do not expose to water or rain.
WIRELESS RECHARGEABLE HEADPHONES COMPATIBLE WITH CANTA TU PRO.
THEY ARE NOT COMPATIBLE WITH CANTA TU HY-2110.
USE FREQUENCY RANGE 2402MHz-2480MHz.
Indicator
Type-C
charging port:
8
power on/o
Publicidad
