YABER E1 Manual página 12

3. Connect to the DVD Player
1) Turn on your DVD player and the projector;
2) Connect to the DVD Player and the projector with the HDMI cable
3) Enter the home page to select the corresponding HDMI as the signal
source.
Note: When the projector is connected to the DVD player via the HDMI
cable, if there is no sound, it may be that the output signal of the HDMI port
of the DVD player is not compatible with HDCP, please try to connect your
Sound bar/Speaker.
4. Connect to the Sound bar/Speaker
If your speaker has AUX port, please use your 3.5mm audio cable connect
the projector and your speaker as the picture shows.
-Audio out
5. Connect to the Computer
1).Connect to the computer and E1 projector with the HDMI cable (Included).
2).Select the HDMI source to project any files on your computer;
3).On your laptop, hold down the key "Win+P" board keys to change your
display mode.
EN 20
AUX por t
Computer only: it is the default option – only displays on the main
monitor.
Duplicate: makes all of the monitors display the same thing duplicating
the desktop on each monitor.
Extend: makes all of your monitors act like one big monitor extending the
desktop across all of them.
Projector only: Displays only on the secondary monitor like a projector.
You can change the screen resolution on the Projector Only Mode
Step: Start > Control Panel > Appearance and Personalization > Adjust
Screen Resolution
WARRANTY
Thank you so much for your purchase and support. We provide 3 year
warranty for E1 projector. If you have any questions, please feel free to
contact us via support@yabertech.com
EN 21