Publicidad
Idiomas disponibles
Idiomas disponibles
• Place the unit away from the clothes dryer, heater or radiator.
• Use the unit to prevent moisture damage anywhere books or valuables are stored.
• Use the dehumidifier in a basement to help prevent moisture damage.
• The dehumidifier must be operated in an enclosed area to be most effective.
• Close all doors, windows and other outside openings to the room.
WHEN USING THE UNIT
• When first using the dehumidifier, operate the unit continuously for 24 hours. Make sure the
plastic cover on the continuous drain hose outlet is installed tightly so there are no leaks.
• This unit is designed to operate with a working environment between 5°C/41°F and 35°C/95°F.
• If the unit has been switched off and needs to be switched on again quickly, allow approximately
three minutes for operation to resume.
• Do not connect the dehumidifier to an outlet that is also being used for other electrical
appliances.
• Select a suitable location, making sure you have easy access to an electrical outlet.
• Plug the unit into an electrical outlet with proper grounding/earth connection.
• Make sure the water bucket is correctly inserted, otherwise the unit will not operate properly.
NOTE: When the bucket gets nearly full, be very careful when moving the unit due to the extra
weight and increased top heaviness.
CONTROL PADS
NOTE: When you push the pad to change operation modes, the unit will make a beep sound to
indicate that it is changing modes.
Auto defrost operation
Clean filter
on indicator light
indicator light
1. FILTER Pad: The check filter feature is a reminder to clean the Air Filter for more efficient
operation. The Filter light (Clean filter indicator light) will illuminate after 250 hours of operation.
To reset after cleaning the filter, press the Filter pad and the light will go off.
2. CONTINUE Pad: Press to activate the continuous dehumidifying operation.
3. TURBO Pad: Controls the fan speed. Press to select either High or Normal fan speed. Set the fan
control to High for maximum moisture removal. When the humidity has been reduced and quiet
operation is preferred, set the fan control to Normal.
4. TIMER Pad: Press to initiate the Auto start and Auto stop feature, in conjunction with the (>) and
(<) pads.
5. (<)/(>) Down/Up Pads:
INSTRUCTIONS
Continuous
High fan
operation on
indicator light
indicator light
Auto defrost
1
2
Bucket full
Timer on/off
indicator light
indicator light
Full
On
Off
3
4
7
5
6
3
Publicidad
