Avalon A9 Manual De Uso Y Mantenimiento página 10

English
About Your Water Cooler
Control Panel
After installation and powering on the unit, allow 5 minutes for the water to fill inside the machine.
After 5 minutes, you will need to hold down the dispense button for 1 minute for both hot and cold
water in order for water to dispense when using the machine for the first time as the water needs
to be siphoned into the hot and cold tanks.
Hot Water Button
Touch to illuminate, then touch and hold the dispense button for a continuous
flow of water. You will need to keep your finger on the dispense button until you
want the flow to stop.
Room Temperature Water Button
Touch to illuminate, then touch and hold the dispense button for a continuous
flow of water. You will need to keep your finger on the dispense button until you
want the flow to stop.
Cold Water Button
Touch to illuminate, then touch and hold the dispense button for a continuous
flow of water. You will need to keep your finger on the dispense button until you
want the flow to stop.
Replace Filter Indicator
When the filters are active, the indicator will be lit up. Once the filters are near
their expiration, the indicator will flash. When the filters' lifetime are up, the filter
indicator will continue to blink and the machine will beep to let you know that
the filters need to be changed.
5