Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFEGUARDS
Before use, please read and follow these safety warnings carefully
and use the grinder properly. These safety warnings are indicated
for the safe and proper use of this product to prevent danger to
the user or others and damage to property. When using electrical
appliances, basic safety precautions should always be followed,
including the following:
GENERAL
• Read all instructions.
• After unpacking the grinder, dispose carefully of the plastic bags
and other packaging so that children and others cannot reach them.
• Remove and recycle or discard all stickers, descriptive labels,
cable ties, and packing materials, including static stickers and
hang tags with ties.
• Never place fingers into the grind chamber while product is
plugged in.
• Do not place any utensils in the grinder or grind chute.
• Do not tamper with the finger guard covering the chute.
• This product contains neodymium magnets, one inside the base
and one inside the catch. Always keep a safe distance (at least 3.9
in / 10 cm) between magnets and all objects that can be damaged
by magnetism.
• Do not use the magnetic catch on top of an electronic scale.
The magnetic catch may interfere with the accuracy of or even
damage an electronic scale.
ELECTRICAL
• To protect against risk of electric shock, do not immerse cord,
plug, or any other part of the grinder in water or other liquid.
4
IMPORTANT
• For best performance, operate this appliance for less than
120 seconds per grind cycle with a minimum of 90 seconds
rest time maintained between two continuous cycles.
• This grinder cannot be operated for more than a total of 6
minutes within any 10 minute time window. If the working time
exceeds 6 minutes, in order to prevent overheating, the grinder
is programmed to automatically shut off for a rest period of
30 minutes.
• The use of attachments not recommended or sold by the
manufacturer may cause fire, electric shock, or injury.
• Use only with AC current and the correct voltage. Ensure that your
main supply voltage is the same as that marked on the underside
of your grinder. To avoid an electrical overload, do not operate
another high-wattage appliance on the same circuit.
• A short power supply cord is provided to reduce the risk of
becoming entangled in or tripping over a longer cord. If a longer
cord is necessary, an appropriate extension cord may be used.
The electrical rating of the extension cord must be equal to or
greater than the rating of this appliance.
• Take care to arrange cords to not drape over the countertop or
tabletop where they can be pulled on by children or tripped over.
• Do not operate the grinder with a damaged cord or plug or if the
grinder malfunctions, or is dropped or damaged in any manner.
Return the damaged appliance to the nearest authorized service
facility for examination, repair, or adjustment.
• To avoid an electrical circuit overload, do not use any high wattage
appliance on the same circuit with this appliance.
• To reduce the risk of fire or electric shock, do not remove bottom
cover from base, or disassemble base of the grinder in any way.
5
Publicidad
