EINHELL VENTURRO 18/210 Manual De Instrucciones página 10

6. Protect batteries from overheating.
Overloads, over-charging and exposure to
direct sunlight will result in overheating and
cell damage. Never charge or work with
batteries which have been overheated –
replace them immediately if possible.
7. Storage of batteries, battery chargers
and cordless tools. Store the charger and
your cordless tool only in dry places with an
ambient temperature of 50°F to 104°F (10°C
to 40°C). Store the Lithium-Ion rechargeable
battery in a cool and dry place at 50°F to 68°F
(10°C to 20°C). Protect them from humidity
and direct sunlight! Place only fully charged
batteries in storage (charged at least 40%).
8. Prevent the Lithium-Ion battery pack from
freezing. Battery packs which were stored
below 32°F (0°C) for more than 60 minutes
must be disposed of.
9. When handling batteries beware of
electrostatic charge: Electrostatic discharges
cause damage of the electronic protection
system and the battery cells. Avoid
electrostatic charging and never touch the
battery poles.
Additional safety instructions
•
Always walk. Never run.
•
Always keep the ventilation opening clean.
•
Never direct the blow hole at persons or
animals.
•
The machine may only be used at reasonable
times of the day, i.e. not in the early morning
or late evening when it will be a nuisance to
other people. The times specified by local
authorities must be observed.
•
Remove all foreign objects with a rake and
brush before starting any blowing work.
•
Where conditions are dusty, dampen the
surface a little or use a sprinkler attachment.
•
Use the full-length blower nozzle extension
so that the air current can work near to the
ground.
•
Watch out for children, pets, open windows
etc. and blow the foreign objects safely away
from them.
•
Warning: This machine is not designed for
use by children.
•
Warning: Risk of injury from rotating parts.
•
Warning: Never use this equipment near
open windows.
SAVE THESE INSTRUCTIONS
Anl_VENTURRO_18_210_SPK7_USA.indb 10 Anl_VENTURRO_18_210_SPK7_USA.indb 10
EN
2. Layout and items supplied
2.1 Layout
1. On/Off switch
2. Speed control
3. Additional handle
4. Lock knob
5. Shoulder strap
6. Lock knob
7. Rear suction tube
8. Guide lug
9. Recess
10. Tapping screw
11. Front suction tube
12.1. Hole 1
12.2. Hole 2
12.3. Hole 3
13. Castors
14. Collection bag
15. Collection bag connection
16. Mount
17. Release lever
18. Wall bracket
19. Cut-out
20. Selector lever blow/vac
21. Battery mount
22. Battery pack (not supplied)
23. Pushlock button
24. Battery capacity indicator
25. Battery capacity indicator button
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
- 10 -
25.07.2023 07:40:21 25.07.2023 07:40:21