Publicidad
Idiomas disponibles
Idiomas disponibles
Review
this chart to find do-it-yourself
solutions
for minor performance
problems.
Any other
service
needed,
other than those
described
in this owner's
manual,
should
be performed
by a Sears
or other
qualified
service
representative.
WARNING
Electric
Shock
Hazard
Disconnect electrical supply before servicing or cleaning the unit.
Failure to do so could result in electric shock or personal injury.
Cleaner won't
1. Unplugged
at wall outlet.
1. Plug in firmly, press the ON/OFF
switch to ON.
start.
2. Tripped circuit breaker/blown
2. Reset circuit breaker or replace
fuse.
fuse at household
service
panel.
3. ON/OFF
switch not turned ON.
3. Push ON/OFF
switch to ON.
Poor job of dirt
pick-up.
1. Full or clogged dust bag.
2. Worn agitator.
3. Clogged
nozzle or dirt tube.
4. Clogged
hose.
5. Hole in hose.
6. Broken/misplaced
belt.
7. Hose not inserted fully.
8. Motor protection
system
activated.
9. Dirty filters.
1. Change dust bag, (page 12).
2. Replace agitator,
(page 16).
3. Clean nozzle area, (page 17).
4. Check for clogs, (page 17).
5. Replace hose.
6. Replace/fix
belt, (page 14-15).
7. Insert hose fully, (page 7-8).
8. Check for clogs, (page 17).
9. Clean filters, (page 13).
Cleaner picks up
1. Wrong pile height setting.
1. Adjust setting, (page 7).
movable rugs, or
pushes too hard.
Agitator does not
1. Broken belt.
1. Replace belt, (page 15).
turn.
2. Belt installed incorrectly.
2. Check BELT CHANGING AND AGITATOR
CLEANING, (page 14-15).
Performance
1.Full or clogged dust bag.
1. Change dust bag, (page 12).
indicator, some
2. Dirty filters.
2. Clear filters (page 13).
models, is red.
3. Clogged airflow passage-dirt
3. Clear clog from airflow passage, (page 17).
tube nozzle, hose.
4. Certain attachment tools.
4. Should return to normal when tool is removed.
Air flow restricted
1. Attachment use restricts air
1. Check ATTACHMENTS, (page 7-8).
with attachment
flow.
use. Sound
2. New carpet fuzz clogged air
2. Check CLOG REMOVAL and clean hose
changes,
path.
(page 17).
Excessive noise
1. Belt rubbing on carpet/bare
1. Push selector all the way forward.
as vacuum is
floor selector shaft.
shut off.
-18-
Publicidad
