Black and Decker ST4500 Manual De Instrucciones página 10

Problem
•Unit will not start.
Troubleshooting
Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker
is tripped.
• Cord or switch is
damaged.
Possible Solution
• Plug in cord.
• Replace circuit fuse.
• Reset circuit breaker.
• Have cord or switch
replaced at
Black & Decker
Service Center or
Authorized Servicer.
For assistancewith your product,visitour website www.blackanddecker.com
for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
MAINTENANCE
CLEANING
Use only mild soap and damp cloth to clean the tool. Never let any
liquid get inside the toot; never immerse any part of the toot into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by Black
& Decker service centers or other qualified service organizations,
always using identical replacement parts.
ACCESSORIES
Recommended accessories for use with your tool are available
from your local dealer or authorized service center. If you need
assistance regarding accessories, please call: 1-800-544-6986.
/K WARNING:
The use of any accessory not
recommended for use with this toot could be hazardous.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and
authorized service locations throughout North America. All Black &
Decker Service Centers are staffed with trained personnel to
provide customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine factory
10
replacement parts, contact the Black & Decker location nearest
you. To find your local service location, refer to the yellow page
directory under "Tools--Electric" or call: 1-800-544-6986.
FULL TWO YEAR WARRANTY
Black & Decker (U.S.) Inc. warrants this product for two years
against any defects in material or workmanship. The defective
product wilt be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product
to the retailer from whom it was purchased (provided that the store is
a participating retailer). Returns should be made within the time
period of the retailer's policy for exchanges (usually 30 to 90 days
after the sale). Proof of purchase may be required. Please check
with the retailer for their specific return policy regarding returns that
are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black
& Decker owned or authorized Service Center for repair or
replacement at our option. Proof of purchase may be required. Black
& Decker owned and authorized Service Centers are listed under
"Toots-Electric" in the yellow pages of the phone directory and
available on our website www.blackanddecker.com.
This warranty does not apply to accessories. This warranty gives
you specific legal rights and you may have other rights which vary
from state to state. Should you have any questions, contact the
manager of your nearest Black & Decker Service Center.
Free warning label replacement: If your warning labels become
illegible or are missing, call 1-800-544-6986 for a free replacement.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, check country
specific warranty information contained in the packaging, call the
local company or see the website for warranty information.
See 'Tools-Electric'
- Yellow Pages -
for Service & Sales
Imported by
Black & Decker (U.S.) Inc.,
701 E. Joppa Rd.
Towson, MD 21286 U.S.A.