Setting Up The Document Shredder - Genie 245CD Manual Del Usuario

recommended that the shredding operation be limited to 2 minutes and that the
unit's motor is allowed to cool down between operations.
7. The device should be setup as close as possible to an easily accessible wall socket
to avoid the danger of stumbeling over the cable.
8. The document shredder must always be deactivated and disconnected from the
electrical line prior to moving, transporting and cleaning the device and prior to
emptying the waste basket to avoid the danger of injuries.
9. Empty the waste basket frequently. Otherwise the shredder may jam.
10. Please do not leave the document shredder unattended e.g. in the event children
or pets are nearby. There is a risk of injury by improper handling.
11. Never open the casing to avoid serious injuries, in the event of problems, please
consult the vendor location, where you purchased this device or our hotline.
12. The device may not be operated with a damaged power cord to avoid electric shock
or short circuit.
Clean the drip trays and paper cutter with a slightly dampened cloth and possibly
13.
with a mild detergent. Do not spray directly into the feed slot to avoid damages
Please read the manual before operating the machine
14.
15. For indoor use only.

Setting up the document shredder:

1. Please first insert the collecting tray (for CDs/DVDs) in the waste basket.
2. Securely mount the document shredder on a waste basket. In the process,
ensure that you do not catch your fingers between the top edge of the
waste basket and the shredder.
Important note:
Ensure that the document shredder is properly fitted onto the basket. To make
sure that CD / credit card remains drop into the inner trash tray, look for the
correct assembly.
3. Connect the main plug to a standard 230-240 volt AC socket.
Starting the document shredder:
- 10 -
.