Publicidad
Idiomas disponibles
Idiomas disponibles
We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY
(877-907-8669).
STEP 3:
Remove 2 Hex Screws (No. 26), 2 Spring
Washers (No. 37), 2 Flat Washers (No. 33)
and 2 Wave Washers (No. 85) from the Long
Axle (No. 40) with 2 Spanners (No. 129).
Insert the Long Axle (No. 40) into the
Handlebar Post (No. 4), then put on 2 Wave
Washers (No. 85), that were just removed, on
both sides of the Long Axle (No. 40). Attach
the 2 Swing Bars (No. 19L/R) on both sides of
the Long Axle (No. 40) using 2 Flat Washers
(No. 33), 2 Spring Washers (No. 37) and 2
Hex Screws (No. 26), that were just removed.
Pre-secure with 2 Spanners (No. 129).
NOTE: If there is difficulty inserting the Long
Axle (No. 40) into the Handlebar Post (No. 4)
by hand, consider using a hammer to gently
tap the Long Axle (No. 40) into the Handlebar
Post (No. 4).
NOTE: Do not completely tighten the Hex
Screws (No. 26) yet.
STEP 4:
Attach 2 Swing Bars (No. 19L/R) to 2 Pedal
Support Tubes (No. 2L/R) with 2 Spacers
(No. 32) and 2 Nylon Nuts (No. 28) using
Open End Wrench (No. 130).
NOTE: Do not completely tighten the Nylon
Nuts (No. 28) yet.
14
Publicidad
