Selecting A Lullaby; Intercom Function - Premier CCTV-5258B Manual De Instrucciones

the display.
• If the receiver is placed on the charger the display will switch off after approx. one minute of
inactivity, but will switch back on if triggered
by the vox detector in the transmitter or by pressing any button on the receiver.
However if VOX is set to OFF, the display will remain on all the time.
Video/Audio switching
You can manually switch off the display to save battery power. The sound from the baby's room
are to be heard permanently and the display will automatically switch on again if triggered by the
vox detector.
Press this button briefly.
For switching the display on again press this button again briefly.
Setting the zoom
You can zoom in on the image.
Press and hold this button for approx. 2 seconds.
The zoom will be activated. You can move the selection, as long as four arrows are shown in the
display (approx. 5 seconds), by pressing the button
upwards or downwards.
To deactivate the zoom function press and hold this button again for approx. 2 seconds.

Selecting a lullaby

Switch on: press the button briefly.
This icon appears in the display.
Use these buttons to select one of the 5 lullabies (1-5).
Switch off: press the button briefly.

Intercom function

Press and hold this button.
This icon appears in the display.
Speak into the microphone to talk with the person near the other unit. When the talking
button is pressed, any playing of lullabies will be aborted.
Range
P-8
to the left, to the right,