Anco AN-100WC Manual página 2

EN WIRELESS CHARGER AN-100WC WIRELESS CHARGER
Thank you for purchasing the wireless charger AN-100WC by anco
refer to the User's manual, and save it for the future reference. Do not disassemble
the device on your own – all repairs should be done by a service technician. Use only original
parts and accessories provided by the manufacturer. The device should not be exposed
directly to water, moisture, sunlight, fire or other heat sources.
SPECIFICATION:
Input voltage: 9 V 2 A (18 W)
Output power: 10 W
The type of charging: wireless
Charging rate: < 6 mm
Cable length: 1,0 m, USB-A - Micro-USB (Type B)
Frequency Range: 110.0~205.0 kHz
faro IMPORT EXPORT GmbH & Co. KG declares that the product is compatible with
requirements and other relevant provisions of the 2014/53/UE directive. You can download
the declaration from https://www.anco.de/konformitaetserklaerungen/
WAY OF USE
To start using the charger, connect it to a power supply source together with an appropriate
power adapter (not included) and the included microUSB cable. When connected it's ready
to use. Make sure your phone is supporting wireless charging standard, and place
it in the middle of the charging surface, charging will start automatically. When your device
is fully charged, take it off the charger and unplug the charger from the power source.
NOTES: For more effective charging, the device should be positioned correctly. The device
to be charged must be directly above the charger coil, which is located in the center
of the charger - otherwise charging may not be performed properly. It is recommended
to remove all device protections, e.g. cases, covers.
SAFETY
• Read and keep the manual for the future reference.
• Do not remove the device cover. There are no parts which can be repaired by user.
Any repairs should be performed by qualified service personnel.
• When using inductive charging, remove any type of pads, covers and accessories, as they
may interrupt the charging process.
• Do not put metal objects on the inductive charger, as this may lead to damage of the device.
• Protect the device against contact with water and moisture to avoid electrocution.
MARKS
Correct disposal of used equipment
The device is marked with a crossed-out garbage bin, in accordance with the
European Directive 2021/19/EU on used electrical and electronic equipment (Waste
AN-100WC
. Before use please
®
IMPORTER'S DATA:
faro IMPORT EXPORT GmbH & Co. KG
Gewerbeparkstraße 21
DE-03099 Kolkwitz
Germany
Designed in EU.
Produced in PRC.