Eye safety
Do not look directly into the glass filter (9) or attempt to activate the device toward
the eyes. To protect the safety of your eyes and those of individuals nearby, the
device will only activate when both skin tone sensors are placed against the skin. If
at any time the device activates when both sensors are NOT in contact with the
skin, STOP use immediately and contact your retailer.
Possible eye injury (potentially leading to loss of vision) or skin injury if instructions
are not followed. Protect the eye from exposure. Do not use the appliance over the
eye lids or close to the eye.
We recommend you look away from the device when pushing the treatment button.
Precautions
• It is not intended for use by people under 18 years old.
• People with reduced physical, sensory or mental capabilities or lack of experience
and knowledge, may use the device if they have been given supervision or instruction
concerning the safe use of the device and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the device.
Always keep the device out of children's reach.
• There are a number of potential risks - exposure to the light output causing burns
or eye damage, electrocution, strangulation from the cord.
Electrical and fire safety
Regularly check the device and cords for visible signs of damage. In case of
damage or cracks, stop using the device. Electric shock may result from using a
damaged device. In case of defects, have the device checked and repaired by an
authorized service center. Unqualified repair work can lead to extreme hazards for
the user.
CAUTION
Always unplug the appliance after use and in case of a power failure to avoid risk or
damage to the equipment.
Do not subject the device to heavy shocks to avoid risk of damage to the lamp.
Do not position the device so that it is difficult to disconnect from the mains supply.
Do not leave the device unattended when it is switched on to avoid the risk of fire
or burns.
WARNING
If the wall socket used to power the device has poor connections, the mains plug
becomes hot. Make sure you plug the device into a properly installed wall socket to
avoid the risk of fire and burns.
No modification of the equipment is allowed. Do not use any other component, nor
manipulate the device. This may damage the unit and cause it stop working.
17