Publicidad
Idiomas disponibles
Idiomas disponibles
I WARNING
ELECTRICAL SHOCK HAZARD.
I WARNING
ELECTRICALLY GROUND BLOWER.
CONNECT GROUND WIRE TO GREEN AND YELLOW
GROUND WIRE IN TERMINAL BOX. FAILURE TO DO SO CAN
RESULT IN DEATH OR ELECTRICAL SHOCK.
7
Connect green (or bare) ground wire from home power
supply to yellow-green ground wire (F) in terminal box
using UL listed wire connectors.
8
Tighten strain relief screw.
9
Install terminal box cover.
10 Check that all light bulbs are secure in their sockets.
11 Reconnect power.
CFM Reduction harness instalation
(OPTIONAL)
C
D
1
Disconnect power
2
Remove the metal grease filters from the bottom panel.
3
Disconnect motor harness.
4
Connect extension end (B) with hood harness (A).
5
Connect extension end (C) with motor connection (D).
6
Install the metal grease filters.
7
Reconnect the power.
Install duct covers
•
When using both upper and lower vent covers, push lower
cover down onto hood and lift upper cover to ceiling and
install with two mounting screws.
NOTE: For vented installations, the upper vent cover may be
reversed to hide slots.
10
A
Hood
B
CFM Kit
Reduction
A. Hood harness
B. Extension end B
C. Extension end C
D. Motor connection
•
Secure the bottom of the duct with 2 - 4 x 8 mm screws.
COMPLETE INSTALLATION
•
Install metal filters. See the "Mainteinance" section.
To get the most efficient use from your new range hood, read
the "maintenance" section.
Keep your Use, Care, and installation Guide close to range
hood for easy reference.
DESCRIPTION OF THE HOOD
5
1
1.
Blower and light controls
2.
LED lamps
3.
Grease filter
4.
Grease filter handle
5.
Duct covers
2
3
4
Publicidad
