SKF TMBH 5 Instrucciones De Uso página 17

10. Spare parts
Designation
TMBH 5-3
TMBH 5-4
TMBH 5-5
TMBA G11
Description
Temperature probe,
magnetic K-type incl.
cable 600 mm (23.6 in)
and plug
Heating clamp
(incl. cable and plug)
Bearing Stand
Heat resistant gloves,
one pair
11. Maintenance and disposal
• Store the heater in a dry area, with low
humidity (0-95% non-condensing).
• Store and transport the heater within a
temperature range of 0- 50 °C (32 - 122 °F).
• Keep the heater clean with a soft dry cloth.
Remove all oil drippings that might remain
after use.
• The heater does not require any specific
maintenance nor regular calibration.
• Do not try to fix the heater yourself.
Approach your SKF contact person or distributor
if there is any malfunctioning or preventive
repair needed.
• The heater is calibrated during production. If
some repairs are performed, the heater needs
to be recalibrated.
• In case of disposal of the heater, take the
necessary measurements to recycle it.
Do not dispose it in a general waste bin.
15