Motorola Solutions L6Q Manual De Instrucciones página 49

b. Secure each hook to the slots in the Solar Panel frame.
3. Choose one of the following options:
If... Then...
If this is a install the Expansion Solar Panel Battery:
dual solar
a. Obtain each item from the kit.
panel or du-
b. Orient the Expansion Solar Panel Battery with the ports and mounting holes
al battery
deployment,
c. Insert the battery into the Solar Panel frame.
d. Insert the Battery Mounting Hardware so that the screw threads are facing
e. Unscrew the covers from the battery tie ports on both batteries.
f.
g. Tighten down the locking sleeve on both connectors.
h. Go to
If this is a go to
single solar
panel or sin-
gle battery
deployment,
facing the same sides as the existing Solar Panel Battery.
Figure 13: Expansion Battery Insertion
towards the panel, and secure the battery with the locking nuts.
Connect the Battery Tie Cable to both battery tie ports by rotating the cable
connectors until they seat into the ports.
NOTE: The Battery Tie Cable connectors and battery tie ports are
keyed so that they can only connect when rotated into the correct po-
sition.
step Step 4.
step Step 4.
MN010089A01-AD
Chapter 3: Hardware Installation
49