The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text.
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
These characters are intended to specifically draw your attention to certain points when handling
the product.
1.3
Symbols
1.3.1
Symbols on the product
The following symbols can be used on the product:
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Li-ion battery
Do not connect the product directly to the drinking-water system. Use a type BA backflow pre-
venter in accordance with EN 12729. Do not use water that has passed through this backflow
preventer as drinking water.
Never strike the battery with an object and never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed Intend-
ed use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4
Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Cordless high-pressure cleaner
Generation
Serial no.
2
Safety
2.1
General safety instructions
In addition to the safety instructions given in the various sections of these operating instructions, the following
points must be strictly observed at all times.
▶ Read all the instructions! Failure to follow all the instructions listed below may result in electric shock,
fire and/or serious injury.
▶ Never tamper with or modify the product or accessories in any way.
▶ Use the right appliance for the job. Do not use the appliance for purposes for which it was not
intended. Use it only as directed and when in faultless condition.
▶ Before beginning work with the power tool, find out how to operate it correctly and about any
hazards associated with the material and how the liquid produced can be disposed of.
▶ Take the influences of the surrounding area into account. Do not use the appliance where there is
a risk of fire or explosion.
2
English
PC 2-22
01
2404923
*2404923*