Publicidad
Idiomas disponibles
Idiomas disponibles
4
MAKE WATER SUPPLIES & WASTE CONNECTIONS
• Thread the two T-PIECES (3) on the wall supplies
• Connect FLEXIBLE SUPPLIES (1, 2) to the
T-PIECES (3).
Note: Connection on fitting supplies are 3/8"
compression.
• Connect left SUPPLY (1) to Hot and right supply to
COLD (2) wall supply.
Note: Faucet supplies are 24" (610 mm) long from
faucet base.
Note: If additional supply length is required, installer
must purchase additional parts separately.
Important: If SUPPLY HOSES (1, 2) are too long,
loop as illustrated to avoid kinking.
• Connect 1-1/4" O.D. (32 mm) tailpiece on push
drain to waste outlet.
D
5
INSTALL BATTERY PACK
• Install battery pack under the sink close to the faucet
using the hook and loop fastener.
Note: additional wire extensions are provided.
1
24"
(610 mm)
WASTE
OUTLET
3/8"
COMPRESSION
HOT
2
3
COLD
"P" TRAP
3
Publicidad
