Publicidad
Idiomas disponibles
Idiomas disponibles
SERVICE RECORDS
Fillin datesas you
Before
Every Every Every
complete regular
Each
5
10
25
Each Befe'e SERVICE
service.
Use
Often
Hours
Hours
Hours
Season Storage
DATES
Chain Lubrication
_/
Change Engine Oil
_"
Remove Fuel
_/
_/
* Adjust after 2 to 4 hours of use,
GENERAL
RECOMMENDATIONS
The warranty on this snow thrower
does not cover items that have been
subjected to operator abuse or negli-
gence. To receive full value from the
warranty, the operator must maintain
the snow thrower as instructed in this
manual. Some adjustments will need
to be made periodically to properly
maintain your snow thrower.
AFTER EACH USE
•
Run the machine to clear the auger
of snow.
•
To prevent freezing of the auger or
controls, remove all snow and slush
from the snow thrower.
•
Check for any loose or damaged
parts.
•
Tighten any loose fasteners.
•
Check and maintain the auger.
•
Check controls to make sure they
are functioning
properly.
•
If any parts are worn or damaged,
replace immediately.
SNOW THROWER
AUGER DRIVE BELT
Adjust the auger drive belt after the first
2 to 4 hours of use, again about mid-
season and twice each season thereaf-
ter (See to "Belt Adjustment"
in the
Service and Adjustment
section).
PRODUCT SPECIFICATIONS
16
HORSEPOWER
DISPLACEMENT
BORE
STROKE
GASOLINE
CAPACITY
OIL CAPACITY
SPARK PLUG:
(Gap .030 in.)
9.5 HP
305 cc
79mm (3.12 in.)
62mm (2.44 in.)
3 quarts
(unleaded)
28 oz. (5W30)
Champion RJ19LM
or equivalent
VALVE
Intake: 0.004 0.006
in.
CLEARANCE:
Exhaust: 0.009
0.011 in.
ARMATURE
AIR GAP:
0.010 0.014
in.
CHAIN LUBRICATION
EVERY 25 HOURS
1. Position speed selector lever in first
(1) forward gear.
2.
Stand the snow blower up on the
auger housing end.
NOTE: When the crank case If
filled with oil, do not leave the
snow blower standing up on the
auger housing for an extended
period of time.
3,
Remove the bottom panel.
4. Lubricate the chains with a chain
type lubricant.
Publicidad
