Descargar Imprimir esta página

GE 21 Serie Manual Del Propietario Y Instalación página 144

Ocultar thumbs Ver también para 21 Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

About the controls with temperaturesettings.
(on some models)
[]
[]
TEMPERATURE SET
WARMER
_
_WARMER
COLDER
COLDER
0 o F Recommencled
37 - F Recommended
[]
[]
[]
Hold
3 seconds
to _eset
NoEd 3 seconds
(on some models)
NOTE: Therefrigerator is shipped with protective film covering the temperaturecontrols.
If this film was not removedduring installation, remove it now
The temperature controls are preset in the factory at 37°F for the refrigerator compartment
and O°F for the freezer compartment. Allow 24 hours for the temperature to stabilize to the
preset recommended settings.
The temperature controls can display both the SET temperature as well as the actual
temperature in the refrigerator and freezer. The actual temperature may vary slightly from
the SET temperature based on usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer and refrigerator
compartments, but does not shut off electrical power to the refrigerator.
4
Changing the Temperature
For Controls-on-the-DoorModels:
To change the temperature,
press
and
release
the
WARMER
or COLDER
pad.
The ACTUAL
TEMPlight
will c(nne
on and
the
display
will show
the
actual
temi)eratm'e.
To change
the
temperature,
tap
either
the
WARMERor COLDER
pad
tmtil
the
desired
temperature
is displayed.
For ControlsInside the Refrigerator:
Opening
the
door
displa):s
the
actual
temperature.
To change
the
temperature,
press
either
the
WARMER
or COLDER touch
pads
tmtil
the
desired
temperature
is displayed.
Once
the
desired
temperature
has been
set,
the
temperatm'e
display
will return
to the
actual
i'efi-Jgei'ator
and
fl'eezer
teil/perattlres
aftei" .5
seconds.
Several
ac!iustments
may be required.
Each
time
)ou
ac!iust
controls,
allow
24 horns
fin" the
refrigerator
to reach
the
temperature
you
haxe
set.
To turn the
cooling
system off, trip the WARMER
pad
fro" either
the
refl_igerator
or the
fl'eezer
tmtil
the
display
shows
OFF. To turn the unit back on, press
the
COLDER pad
for either
the
refl_igerator
or fl'eeze_:
Then
press
the
COLDER pad
again
and
it will go to
the
preset
points of O°Ffi)r
the fl'eezer
and
37°Ffi)r
the
refi_igeratox:
Setting
either
or both
controls
to Off stops
cooling
in both
the
fl'eezer
and
refl_igerator
compartments,
but
does
not shut
off electrical
power
to the refi_igeratm:

Publicidad

loading

Este manual también es adecuado para:

25 serie