Lenco LS-470 Manual De Usuario página 14

NOTE: In order to achieve the best sound, it is advised to set the
turntable volume to a minimal level. Then the turntable's audio will be
played back through your own amplifier, speakers, etc.
1. Setting pre-amplifier selector switch
This product has a built-in phono amplifier function. You can use
the product even if you do not have a phono amplifier or
connectable equipment with a built-in phono amplifier.
Use the pre-amplifier selector switch to set the output, as shown
below.
Connectable equipment being
used
Device with phono input
Device without phono input
NOTE: The RCA Jacks are not designed to be connected directly to the
passive/unpowered speakers on LINE mode. If connected to the passive
speakers, there will be no sound.
Position of pre-amplifier
selector switch
PHONO
LINE
14
RCA wired connection
Active Speakers
or
Amplifier
Where to connect RCA audio
cable
Phono input jack and ground
(earth) terminal of
connectable equipment
AUX or line input jack of
connectable equipment