Publicidad
Idiomas disponibles
Idiomas disponibles
English
To Install Wall Anchors
If the location, you have chosen to mount
your telephone is a hollow wall without any
beams you will have to use the included
wall anchors.
To install, place the template against the
wall where you wish to place your
telephone. Mark the wall at the location of
the two + on the template by pushing a pen
or pencil through the template. Drill a 1/4"
hole at each mark.
With a Phillips screwdriver, begin
tightening the screw by turning it clockwise.
Stop turning when you feel firm resistance.
Turn the screw counterclockwise until the screw head is about 1/4" out of the
wall.
Install the line cord at back of the telephone. Adjust the switches to your
preference. Position the line cord through the slot on the bottom of the cabinet.
Line up the holes with the two screws. Place the telephone onto these two
screws and gently pull down.
This may require a little fine tuning until the phone is seated securely.
Operation
Making and Answering Calls
To get a dial tone or answer an incoming call, lift the handset.
To hang up, either replace the handset or simply press down the Handset
Cradle.
To Redial
The last number dialed is automatically stored in the phone. To redial the last
number, lift the handset and press the REDIAL button.
5
Publicidad
