Publicidad
Idiomas disponibles
Idiomas disponibles
o
Pivot the integrated
washer end of anti-
sway bar (S) towards mower deck bracket
on right side of mower° Insert integrated
washer end of bar into hole in rear mower
bracket
(D). Move mower as needed to
insert integrated
washer end of bar into
rear mower bracket
(D)o
•
Secure
with
small
washer
and
small
retainer
spring as shown.
A. Mower Side Suspension Arms
Q. Deflector Shield
5_
INSTALL ANTI-SVVAY
BAR (S)
(IF EQUIPPED)
ANTI-SWAY
BAR
(S)
<_
Towards
Towards
Transaxle
Mower Deck
90 ° End
Integrated Washer End
•
From
right
side
of mower,
first
insert
90 ° end of anti-sway
bar (S) into hole in
transaxle
bracket
(T), located
near left
rear tire in front of transaxle.
NOTE: Flashlight
may be helpful.
Anti-Sway
Iq
'_ , _...........
Bar (S)
i
!
":
Location,
"_
\
Transaxle Bracket
Located Between Rear{T)Tires
NOTE: Depending on model, bracket (T) may
be different than shown but hote for anti-sway
bar wilt be in same position/location.
6.
ATTACH MOWER
SIDE SUSPENSION
ARMS
(A) TO CHASSIS
•
Position front hole in side suspension
arm
(A) over pin on outside of tractor chassis
and secure with large washer and large
retainer
spring
(B) o
•
Repeat on opposite
side of tractor.
U
A.
Mower Side Suspension Arms
Bo Retainer Spring
D, Right Side Rear Mower Bracket
7.
ATTACH
REAR LIFT LINKS (C)
•
insert rod end of rear lift link (C) into hole
(U) in tractor
lift shaft
suspension
arm
and pivot link down to mower.
o
Lift rear corner of mower and position slot
in link assembly
over pin on rear mower
bracket (D) and securewith
large washer
and large retainer
spring.
•
Repeat on opposite
side of tractor°
10
Publicidad
