Bluefin SUP E-SWIFT LITE Manual De Instrucciones página 6

I N F L A T I O N
P R O C E S S
Operating The Pump
Press the pressure unit toggle button to select
the PSI you need. Press the increase pressure button
or decrease pressure button to set the
required pressure value you need. The pressure value
can range from 0 to 20PSI.
After finishing the above steps, press the On/Off button
to start to inflate. During the inflation process,
you can press the increase or decrease pressure button
to change the pressure value. Press the pressure unit
toggle button to switch the unit, and press the On/Off
button to stop.
Press and hold the On/Off button for 3 seconds to start
the pump using the most recently used pressure value.
*Check that this does not exceed the limit for your
current inflatable to avoid causing any damage. When
the pressure reaches the set value, the air pump will
stop working automatically.
5