Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
(continued)
Blowing
Feature
Your Vac features a blowing port. It can
blow sawdust and other debris. Follow
the steps below to use your Vac as a
blower.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a blower.
A
WARNING: To reduce the risk of
injury to bystanders,
keep them clear
of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
_k CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
1. Locate blowing port of your Vac.
2. Insert the locking end of the "Pos-I-
Lock ®''hose into the blowing port of the
Vac. The hose should snap into place.
To remove the hose from the Vac,
press the release button in the hose
assembly and pull the hose out of the
Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose, then place the
car nozzle on the wand.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Craftsman recommended
accessories are
available at Sears retail stores and
sears.com. The Sears Blower Nozzle
Stock No. 16933 is recommended
for
blowing debris.
Push/Pull Handle
Locking
Hose End
Blowing
Port
Jm
Handle
Car Nozzle
(Optional)
Swivel End
Of Hose
Extension
Wand (Optional)
Publicidad
