Royal Catering RCWK-8L-AUT Manual De Instrucciones página 18

3.3.2. Setting the temperature
1. Press the SET button for 3 seconds until "OFF" appears on the display. Then press "UP" for a few seconds
until the display shows the code "HP."
2. Set the temperature with the "UP/DOWN" buttons.
3. Wait a few seconds until the device displays "OFF."
4. When the device reaches the set temperature, it will go into the mode of keeping it.
There are two temperature display modes. One is the real-time temperature mode, which means the display
will always show the actual temperature of the water inside. The second is the 100°C mode, which means
that regardless of the set temperature, when the water inside reaches the set temperature, the display will
always show 100°C.
3.3.3. Setting the 100°C mode
1. Press the SET button for 3 seconds until "OFF" appears on the display.
2. Press the SET button for 3 seconds, then press the "SET" button to select the "
3. Press "UP" until the display shows "
4. Heating to set temperature - the keep warm light is on and the display screen shows 100°C (if 80°C is set
as the temperature to keep, when the water temperature reaches 80°C, the display screen will show
100°C).
3.3.4. Time setting
The factory default setting is 24 hours a day. If the user has a local time difference, please select the code
setting according to the local time: hour - minute - second.
Example: 7:30:28:
1. Press the "ON/OFF" button for 3 seconds until the display shows "OFF."
2. Press the "SET" button for 3 seconds, select the time code
"UP/DOWN" buttons.
3. Press "SET," select the minute code "
4. Press "SET," select the seconds code "
5. Press "ON/OFF" to save the settings.
EN
."
" and set the minute value to "30."
" and Set the value to "28".
."
", Then set the value "7 "with the