Panasonic ER-GB42K Instrucciones De Funcionamiento página 13

3
Press the power switch to turn
on the trimmer.
4
Cut your beard slowly, moving
upward from the bottom with
the power switch facing outside.
Notes
• Do not use any shaving creams as these may cause a
decrease in cutting performance due to scoring of the
blades.
• Make sure to rinse the main body with water and apply the
oil to the blades after wet trimming.
中南美向.indb 13
Cleaning the trimmer
It is recommended to clean after each use.
1. Remove the trimmer from the AC adaptor.
To remove light dirt
2. Remove the comb
attachment and turn the
trimmer on.
3. Run water down the
water inlet at the front
of the main body,
rinse thoroughly for
approximately 20
seconds, and then turn
the trimmer off.
Rinse with water and
shake up and down
several times to remove
the water.
Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
To remove heavy dirt
2. Remove the comb
attachment and blade.
3. Clean the trimmer, the
blade and the comb
attachments with running
water.
Rinse with water and
shake up and down
several times to remove
the water.
13
17/4/6 下午5:45