Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF TERMINAL BOARDS
L1:
bus connection (not polarised)
L2:
bus connection (not polarised)
C1:
floor call button input
C2:
floor call button input
TECHNICAL SPECIFICATIONS
Stand-by consumption:
Active voice consumption:
Working temperature range:
Humidity:
Supplementary ring control
positive (only 1172/32):
PROGRAMMING
Refer to the programming chapter for instructions on
programming the door unit with digitiser Ref. 1072/19A
or 1072/5.
NOTE: The following method can be used to
program the door phones without accessing
each apartment if no door phones have
been programmed and if the system is set
up for floor call function:
a) Book door phones on calling station as
usual and go to the first booked user.
b) Press the floor call button; the door
phone
programming.
c) Wait for five seconds and press the
floor call button; the door phone (if
programmed) will output the floor call
tone.
d) Go to other users and repeat procedure
from point b).
OPERATION
The door phone can generate six different calling
tones. The LED will blink to visually confirm
selection.
The LED will light up fixed to indicate that one or
more main input doors or the respective secondary
door is open (where the service is activated only).
The door opener button will operate the lock in the
following cases:
• for the entire conversation time.
• without hanging up for the programmed off-hook
waiting time.
Calls can be made to the concierge in systems with
concierge phone or switchboard.
DS1072-021B
1.6mA max.
40mA max.
-5 +45°C
90% RH @ 30°C
V max=30Vdc
I max=40mAdc
tone
will
be
heard
Concierge calls in 2nd Edition systems with
concierge switchboard.
Lift the handset and press the concierge call
button. Nothing will happen if the switchboard is off.
Conversely, the door phone will beep and the call
will be sent if the switchboard is on. Two possibilities
may occur:
1. The switchboard answers within 10s or the
door phone line is free: a conversation with the
switchboard is established.
2. The switchboard does not answer within 10s or
the door phone line is busy: the switchboard
stores the call and the LED on the door phone
will flash after the 10s time-out. Hang up and
wait for the switchboard operator to return the
call.
Concierge calls in 2nd Edition systems with
concierge door phone.
Lift the handset and press the concierge call button.
Nothing will happen if the door phone is off.
Conversely, the concierge door phone will beep and
the call will be sent if the concierge door phone is
on. Two possibilities may occur:
1. the concierge answers within 10s or the door
phone line is free: a conversation with the
concierge is established.
2. the concierge does not answer within 10s or the
line is busy: the door phone LED will flash after
the 10s time-out. Hang up and try again later.
Selecting calling tones
after
The door phone is equipped with six two-tone
calling tones each lasting 3 seconds. The door
phone calling tone and the floor calling tone can be
selected during installation as follows:
Fig. 1
W1 - (b)
W1 - (a)
31
Publicidad
