Publicidad
Idiomas disponibles
Idiomas disponibles
1600A0235F.qxp_GKS18-25C 4/20/20 8:17 AM Page 11
starting the tool accidentally.
Inserting and Releasing Battery
Pack
in the battery/charger list, included with
your tool. Using other types of batteries
may result in personal injury or property
damage.
Slide charged battery pack 17 into the
housing until the battery pack locks into
position (Fig. 2).
Your tool is equipped with a secondary
locking latch to prevent the battery pack
from completely falling out of the handle,
should it become loose due to vibration.
To remove the battery pack 17, press the
battery pack release button 18 and slide
the battery pack forward.
Press the battery pack release button 18
again and slide the battery pack completely
out of tool housing (Fig. 2).
Fig. 2
ind Quality Products Online at:
Disconnect battery pack from tool before making any assembly, adjustments
or changing accessories. Such preventive safety measures reduce the risk of
Use
only
batteries recommended
18
17
20
22
b
23
21
a
GlobalTestSupply
www.
Saw Assembly
Attaching the Blade
Bosch
only blade rated 5000/min (RPM) or
greater. Using blade not designed for the
saw may result in serious personal injury
and property damage.
1.
Press and hold the shaft lock button 10.
Turn blade stud 21 with provided
wrench 23 in the direction a and remove
blade stud 21 and outer washer 22.
Note: the wrench is stored near the
battery compartment (Fig. 2).
2.
Make sure the saw teeth and arrow on
the blade point in the same direction as
the arrow on the lower guard.
3.
Retract the lower guard all the way up
into the upper guard. While retracting
the lower guard, check operation and
condition of the LOWER GUARD
SPRING.
25
24
Use
only
(184mm) blade. Use
10
11
13
.com
sales@GlobalTestSupply.com
7-1/4"
11
Publicidad
