Publicidad
Idiomas disponibles
Idiomas disponibles
GETTING STARTED
How to Make Cocktails
1. Press Control Panel, rotate Selector Dial, or open
and close the Lid Handle to wake up machine. Lift
Lid Handle and insert a Cocktail Capsule in Capsule
Holder with tab facing front center position.
2. Lower Handle and press firmly until latch is in the
fully closed position.
NOTE: Once Capsule is punctured, the drink must
be made. The contents of the Capsule will drain if
removed from Holder before finishing drink.
3. Barcode Reader will recognize cocktail. Display
will indicate what type of glass to place under
Dispenser, and if ice is recommended. Drinks may
also be dispensed into a Shaker. After placing the
appropriate glass, press Next on Control Panel.
IMPORTANT: If Home screen is displayed after
puncturing Capsule, open Lid and wipe top of
Capsule and Barcode Reader with a soft, dry cloth
and close Lid.
NOTE: If rum or gin are needed for the cocktail,
machine will prompt to confirm that correct spirit is
in Spirit Bottle Holder. Locked bottles will require an
attendant to unlock and switch bottles.
4. Rotate Selector Dial to see choices of strength:
Mocktail, Light, Regular, or Strong. Refer to Cocktail
Capsule Packaging to understand strength for each
cocktail. When desired strength is visible in display,
press Mix to select that strength.
5. Cocktail Machine will dispense appropriate spirit,
contents of Capsule, and water. Control Panel will
show a circle that tracks progress. Bubbles will
appear in Spirit Bottle as spirit is being dispensed.
6. Once drink is complete, lift Lid Handle to remove
Cocktail Capsule and dispose of recyclable container.
Cocktail Machine is ready for next drink.
NOTE: When finished making cocktails, remove
Water Reservoir and discard water, then replace
Reservoir on Base.
|
8
Bartesian Customer Care 1.833.501.6889
Place a Highball Glass
With Ice
Under the Dispenser
Next
Spirit Strength
Mocktail
Mix
Publicidad
