Descargar Imprimir esta página

PRO LIFTS VMB TE-071 Manual De Instrucciones página 9

Torre elevadora

Publicidad

Idiomas disponibles

Idiomas disponibles

O R I G I N A L
4. USER INSTRUCTIONS.
4.1 -
swivel wheels (T).
4.2 - Remove the legs from their trans-
port supports (S) and fully insert them into
that the lift is in vertical position using the
spirit level (L
the stabilizer (Q), turning the handle (H)
if necesary.
4.3 - THE MAXIMUM LOAD IS 220 Kg
(485 lb). The lift should NEVER be over-
the most important issue. Untighten the
screw (A) and place the load onto the lift
using an adequate support according to
the need, use so that the weight of the
load will only be elevated in a vertical di-
rection. The minimum load is 25 Kg.
4.4 - Elevation:
1
) to lift the tower, the red
N
ensuring that the load will never fall.
4.5 - Blocking: Once the system is eleva-
ted to its required height, gently turn the
PRO LIFTS S.L.
3.17 - Only original replacement parts should be used.
V
R
-
Depósito legal y copyright. Todos los derechos reservados.
ENGLISH
and release strain applied on the cable.
Security system ALS
The TE-71 incorporates the patented
Security). This VMB red trigger system
tion it is left in. Each section of lift has an
4.6 - Lowering: To bring the lift down you
1
N
) and at the same time pull
the red ALS-1
2
N
the ALS-1
has been completely lowered. All red ALS
one.
CAUTION
When two towers are used to elevate a
bridge, down truss or many towers to ele-
vate a structure of any type, it is almost
2
N
) direction
), whilst maintaining
-
-
9

Publicidad

loading