Linea 2000 DOMO DO243SV Manual De Instrucciones página 48

CLEANING AND MAINTENANCE
CLEANING THE APPLIANCE
Clean the appliance with a slightly moist soft cloth. Dry the machine off well. Never submerge the
appliance in water!
CLEANING THE DUST RESERVOIR
Clean the dust container and filters at least once a month to maintain optimal performance.
1. Disconnect the wand assembly from the motor part.
2. Hold the dust container over a rubbish bin and press the release button to open the cover. Empty the
dust container.
3. Close the dust container, slide the dust container release button down, and detach the dust container
from the motor part.
4. Hold the dust container (a), remove the HEPA inlet filter (b), then lift out the filter compartment (c+d).
Turn the upper part anti-clockwise and pull the inner part (c) out of the outer coarse filter (d).
5. Wash all the parts under cold running water, including the dust container.
6. Allow all the parts to dry completely before reassembling them.
7. Make sure all the parts fit together nicely when assembling before clicking the dust container back
into the motor part.
1
7
CLEANING THE FLOOR BRUSH
1. Remove the floor nozzle from the upright vacuum cleaner. Press the
floor nozzle and remove it from the machine.
2. Slide the switch backwards to unlock the floor brush.
3. Gently remove any hair and dirt from around the brush; do this by hand or carefully with a knife.
4. Rinse the brush under cold running water.
48
DO243SV
2 3
release button at the back of the
4
b
c
d
a