Linea 2000 DOMO DO243SV Manual De Instrucciones página 49

5. Allow the brush to dry completely before reassembling it.
6. To refit the brush, place the right side of the brush against the gear (a) and push the left side (b) until it
clicks into place.
7. Push the nozzle back onto the stick. The machine is now again ready for use.
1
PROBLEM AND SOLUTION
PROBLEM
The machine does not start up.
Loss of suction.
The rotating floor brush is not rotating.
All the indicator lights are flashing simultaneously.
www.domo-elektro.be
2
· The battery is empty. Charge the machine.
· The filters are dirty/the dust reservoir is full.
· The floor nozzle is clogged/the floor brush is
blocked.
· Clean the machine as described in this manual.
· The floor brush is blocked. Turn off the vacuum
cleaner and remove the object blocking the
floor brush.
· The floor brush is assembled incorrectly.
Follow the instructions to correctly assemble
the floor brush as described in this manual.
· The floor brush is blocked. Turn off the vacuum
cleaner and remove the object blocking the
floor brush.
6
b a
SOLUTION
49
DO243SV