Publicidad
Idiomas disponibles
Idiomas disponibles
11. Do not place mixer or bowl on or near a hot gas or electric
burner, in a heated oven (microwave, convection, etc.) or on any
other heated surface.
12. Do not use mixer for other than intended use.
13. Do not leave mixer unattended while it is operating.
14. Any servicing, other than cleaning and user maintenance
should be performed by any authorized service representative.
15. When mixing liquids, especially hot liquids, use a tall container
or make small quantities at a time to reduce spillage.
16. Do not abuse electrical cord. Never carry the mixer by the cord or
yank it to disconnect from an outlet; instead, grasp the plug and
pull to disconnect.
THIS UNIT IS INTENDED
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
The motor of your mixer is protected by a heat cured insulation.
This is a standard process. Due to the heat curing of the insulation,
you may experience an odor and possibly a slight wisp of smoke
from your mixer's motor. This effect will disappear after the first
few uses.
FPRVMCSM02_12ESM1.indd 5-6
E2
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable
parts inside. Power unit never needs lubrication. Do not attempt to
service this product.
A short power supply cord is provided to reduce the risk resulting
from becoming entangled in or tripping over a longer cord. An
extension cord may be used if care is exercised in its use. If an
extension cord is used, the marked electrical rating of the extension
cord should be at least as great as the electrical rating of the stand
mixer.
The cord should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by children or
tripped over unintentionally. Do not immerse in water or other
liquids. No liability can be accepted for any damage cause by non-
compliance with these instructions or any other improper use or
mishandling.
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock,
this plug is intended to fit into a polarized outlet only
one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician. Do
not attempt to modify the plug in any way. If the plug fits loosely into
the AC outlet or if the AC outlet feels warm, do not use that outlet.
E3
5/31/12 11:47 PM
Publicidad
