Ec Declaration Of Conformity (Original); Confirmation Of Cip Testing; Health And Safety Of The Operator; Noise Information - Hilti DX 76 Manual De Instrucciones

12 EC declaration of conformity (original)

Designation:
Type:
Year of design:
en
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
07/2012

13 Confirmation of CIP testing

The Hilti DX 76 has been system and type tested. As a
result, the tool bears the rectangular PTB approval mark
showing approval number S 813. Hilti thus guarantees
compliance with the approved type. Unacceptable de-

14 Health and safety of the operator

14.1 Noise information

Powder-actuated fastening tool
Type
Model
Caliber
Power regulation
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
Emission noise-pressure level in the work station,
2
L
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
16
Powder-actuated fasten-
ing tool
Tassilo Deinzer
Head of BU Direct Fastening
BU Direct Fastening
1
WA, 1S
3
pC, peak
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
DX 76
Zulassung Elektrowerkzeuge
Hiltistrasse 6
2004
86916 Kaufering
Deutschland
07/2012
fects or deficiencies, etc. determined during use of the
tool must be reported to the person responsible at the ap-
proval authority (PTB) and to the Office of the Permanent
International Commission (C.I.P.).
DX 76
Series
6.8/18 blue
4
Fastening to 8 mm steel (400 MPa) with X-ENP 19
L15MX
114 dB (A)
110 dB (A)
139 dB (C)