Metabo DS 125 Instrucciones De Manejo página 7

20. DIRECTION OF FEED. Feed work into a blade
or cutter against the direction of rotation of the blade
or cutter only.
21. NEVER LEAVE TOOL RUNNING
UNATTENDED. TURN POWER OFF. Don't leave
tool until it comes to a complete stop.
22. REPLACEMENT PARTS. When servicing use
only identical replacement parts.
GROUNDING INSTRUCTIONS
In the event of a malfunction or breakdown,
grounding provides a path of least resistance for
electric current to reduce the risk of electric shock.
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
Do not modify the plug provided – if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. The
conductor with insulation having an outer surface
that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or
replacement of the electric cord or plug is
necessary, do not connect the equipment-
groundingconductor to a live terminal.
Check with a qualified electrician or service
personnel if the grounding instructions are not
completely understood, or if in doubt as to whether
the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong
grounding plugs and 3-pole receptacles that accept
the tool's plug.
Repair or replace damaged or worn cord
immediately.
This tool is intended for use on a circuit that has an
outlet that looks like the one illustrated in Sketch A
on page 4. The tool has a grounding plug that looks
like the plug illustrated in Sketch A on page 4. A
temporary adapter, which looks like the adapter
illustrated in Sketches B and C, may be used to
connect this plug to a 2-pole receptacle as shown in
Sketch B if a properly grounded outlet is not
available. The temporary adapter should be used
only until a properly grounded outlet can be
installed by a qualified electrician. The green-
colored rigid ear, lug, and the like, extending from
the adapter must be connected to a permanent
ground such as a properly grounded outlet box.
-----------------------------------------------------
The grinding wheel must match the machine.
Observe the maximum grinding wheel diameter and
thickness. The hole diameter must match the back
flange without play. Do not use adapters or
reducers.
Do not drill grinding wheels.
Do not trim grinding wheels.
The grinding wheels must be fitted perfectly and
turn freely.
Damaged, eccentric or vibrating grinding wheels
must not be used.
When clamping the grinding wheels, only the
flanges included in the delivery must be used. The
intermediate layers between flange and grinding
tool must be made of elastic materials, e.g. soft
cardboard etc.
Protect grinding wheels against shocks, bumps and
grease.
Grinding discs must be stored and handled with
care in accordance with the manufacturer's
instructions.
Do not touch the rotating grinding wheel!
Only work when the safety cover (1) is fitted.
Swivel the eye preservers (9) downwards before
grinding.
Use the perimeter (not the sides) of the grinding
wheels for grinding.
Do not reduce the speed of the grinding wheel by
pressing on the sides.
The workpiece to be processed must be large
enough, or small enough, to be held safely with both
hands.
Only work when the grinding wheels are fitted to
minimise the risk of coming into contact with the
rotating spindle.
High temperatures can result after long-term
operation.
Always wear eye goggles, hearing protection
and protective gloves. Use other available
personal protective equipment, e.g. suitable
protective work clothing. Ensure that sparks
produced during work do not constitute a risk to the
user or other personnel and are not able to ignite
inflammable substances. Endangered areas must
be protected with flame-resistant covers. Make sure
that fire-risk areas are always provided with suitable
fire extinguishers.
California Prop 65 08_2018
Some dust created by power
WARNING
sanding, sawing, grinding,
drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
other masonry products, and
• Arsenic and chromium from chemicallytreated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic
particles.
ENGLISH en
7