beeplo b5000 Manual Instrucciones página 33

A Global Leader in Hig h-Tech Banking Equi pment
Innovation you can count on
3.0 Operations
3.1 Power Up
Connect the power cord to the unit, then to a power source and turn the power switch on; the unit will
conduct a self-check and will be ready after spinning the counting wheels several times.
3.2 Auto Mode
When turned on, the unit automatically set the "AUTO" mode. Once the bills are placed in the hopper
plate, the machine will start counting automatically.
The model could be changed from Auto to Manual mode by pressing "AUTO" button, the message
"AUTO" in the screen will turn to "MAL". It means the model is manual count mode.
Once the bills are placed in the hopper plate, the unit will start counting by press "START" button.
3.3 CNT Function
After count money, the number of counted bills will be shown in the screen.
Place the bills between the counting
guides as shown in figure 1. Swiftly,
push the bills with a finger (see figure 2)
to make them rest on top of the hopper
plate, in the correct counting position(see
figure 3).
figure 2
figure 1
figure 3
10