beeplo b5000 Manual Instrucciones página 37

A Global Leader in Hig h-Tech Banking Equi pment
Innovation you can count on
5.0 Maintenance of the Machines
5.1 Verifying the Adjustment of the Hopper Plate
The hopper plate ensures proper feeding of the bills for counting. It is secured to
the back of the unit by means of two pivoting points and a magnetic lock. To verify
that the Hopper Plate is properly adjusted, press or lift the hopper plate and look
for any displacement (see figure 4). If any displacement occurs, press or loft the
hopper plate until the magnetic lock holds the piece in place.
Adjust a proper gap between hopper and feeding roller according to turning the bill
adjustment screw. Turn it left to decrease the space and turn right to increase it.
5.2 Flipping the Rubber Tongue
The rubber tongue should be flipped when the bill thickness adjustment screw does not solve the problem
of improper banknote feeding.
tighter looser
figure 4
14