Descargar Imprimir esta página

Kuppersbusch KI6130.0SE Instrucciones De Uso página 18

Ocultar thumbs Ver también para KI6130.0SE:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 23
The manoeuvres are done by means
of the touch keys. You do not need
to exert force on the desired touch
function
Use the cursor slider (2) to adjust
power levels (0 - 9) by sliding your
sliding towards the left decreases it.
It's also possible to directly select a
directly on a desired point of the
cursor slider (2)
2
Touch the On touch key
at least one second. The touch
will be heard and the indicators (3)
will light up displaying a "-". If any
If you do not take any action in the
next 10 seconds the touch control
you can disconnect it at any time
by touching the touch button
(lock function activated). The touch
button
(1) always has priority to
disconnect the touch control.
ACTIVATING PLATES
Once the Touch Control is activated
with sensor
turned on by following these steps:
position of one of the cursors
"slider" (2). The zone has been
selected and simultaneuously the
power level will be set between
0 and 9. That power value will
be shown on the corresponding
power indicator and its decimal
dot (4) will keep light up during
10 seconds.
Use the cursor slider (2) to choose
a new cooking level between 0
and 9.
TURNING OFF A PLATE
Using the touch slider key (2) lower
the power to level 0. The hotplate will
H will appear in its power indicator
cooking area is hot and there is a risk
light up if the hob is still connected.
TURNING ALL PLATES OFF
(1) for
All plates can be simultaneously
disconnected by using the general on/
(1). All plate indicators (3)
Induction cooking zones have a built-in
stop working if there is no pan present
or if the pan is not suitable.
The power indicator (3) will show a
symbol to designate "there is no pan
detected or the pan is not suitable
stop supplying energy and it will
show the symbol for "there is no pan".
When a pan is once again placed
will resume at the same power level
previously selected.
undesired operations. This function is
useful as a childproof safety.
(6) for at least one second.
turns on indicating that the control
panel is blocked. To deactivate the
(6) again.
If the on/off sensor
to turn off the appliance while the
possible to turn the cooktop on again
until it unblocks.
touch key
(11) and the locking touch
key
(6) simultaneously for three
each action will be deactivated. The
time indicator (12) will display "OF".
This deactivation will not be applied
or the locking/unlocking of the touch
keys always remain activated.
To once again activate all the beeps
simultaneously press the touch key
(11) and the locking touch key
(6)for three seconds. The time
indicator (12) will display "On"
EN
(1) is used
17

Publicidad

loading

Este manual también es adecuado para:

Ki6130.0sr