Publicidad
Idiomas disponibles
Idiomas disponibles
set to manual mode.
Note: Press the
button to return the oven to manual mode
after every "Automatic" cooking session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set. Let us
suppose that the display shows 10:00.
1. Turn the oven control knob to the cooking setting and
temperature desired (example: convection oven at 200°C).
2. Press the
and the use (within 4 seconds) the - and +
buttons to set the length of the cooking time. Let us sup-
pose that 30 minutes was set for the length of the cooking
time. In this case, the display will show:
Release the button, and within 4 seconds, the current time will
reappear with the
symbol and "auto."
3. Press the
button, and then use the - and + buttons to set
the end cooking time. Let us suppose that it is 13:00
4. Release the button and the display will show the current
time within 4 seconds:
When "auto" is lighted, it indicates that the length and end
cooking time have been preset to operate in automatic mode.
At this point, the oven will turn on automatically at 12:30 in
order to finish the cooking session within 30 minutes. When the
oven is on, the
symbol (cooking pot) will appear on the
display for the entire length of the cooking process. The
button can be pressed at any time to display the setting for the
length of the cooking time, while the
to display the end cooking time.
At the end of the cooking time, an acoustic signal will sound.
Press any button it turn it off (except the - and + buttons).
Immediate Start Time with Preset Cooking Length
When only the length of the cooking time is set (points 1 and 2
of the paragraph entitled, "Delayed Start Time with Preset
Cooking Length"), the cooking session starts immediately.
Cancelling a Preset Cooking Time
Press the
button, and use the - button to set the time to:
Then press the manual cooking mode button
Timer Feature
The timer can be used to count down from a given length of
time. This feature does not control when the oven comes on or
turns off, but, rather, it only emits an acoustic signal when the
preset time has run out.
Press the
button, and the display will read:
TIMER (ELECTRIC OVEN)
button can be pressed
.
6
Then use the - and + buttons to set the desired time.
Release the button, and the timer will start at that second. The
display will show the current time.
At the end of the preset time, an acoustic signal will sound,
which can be turned off by pressing any button (except the -
and + buttons), and the
Changing and Cancelling Settings
•
The settings can be changed at any time by pressing the
corresponding button and using the - or + button.
•
When the length setting for the cooking time is cancelled,
the end cooking time setting is also cancelled, and vice
versa.
•
When in automatic cooking mode, the appliance will not
accept end cooking times prior to the start cooking time
proposed by the appliance itself.
Timer
(mod.CP 648 MT.1 - CP 758 MT.1 - CP 6480 MT.2 (X) F)
Manual operation
Turn the timer knob with symbol
marker to symbol
(manual). Turn the oven on at the selector
knob and set the desired temperature on the thermostat knob. To
turn the oven off, turn the timer knob back to its initial position " " .
Operation with cooking time programming
Turn the timer knob clockwise, setting the marker to the desired
cooking time (from 10 to 120 minutes). Turn the oven on at the
selector knob and set the desired temperature on the thermostat
knob. Once the countdown is over, a buzzer will sound, and will
stop doing so after 1 minute or if you press any button whatsoever.
Remember that the timer is deactivated when cooking starts (be it
immediate or programmed).
Cooling ventilation
(CP 648 MT.1 - CP 6480 MT.2 F - CP 649 MT.1 - CP 649 MD.2 -
CP 758 MT.1)
In order to cool down the temperature of their exterior, some models
are fitted with a cooling fan that comes on when the programme selec-
tor knob "G" is turned. In this case, the fan is always on and a
normal flow of air can be heard exiting between the oven door and
the control panel.
Note: when cooking is done, the fan stays on, even if knob "G"
is set to "0", until the oven has cooled down sufficiently.
For mod ...MT.1:, the fan comes on automatically only when the
oven is hot.
Once you have removed the food from the oven, we recommend
you leave the oven door ajar for a few minutes: this will drastically
reduce the duration of the cooling cycle. The process is controlled
by an additional thermostat and can consist of one or more cycles.
symbol will turn off.
anti-clockwise and set the
Publicidad
