Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove battery pack from tool and engage trigger safety
lock‑off
2
.
2. Using the hex wrench
hex bolts
at the top of the magazine
18
bolt
on the foot of the tool.
19
3. Lift the magazine
7
away from the nailer.
4. Remove jammed/bent nail, using pliers if necessary. Clear
out any debris in the nail channel if required.
5. Install the magazine back into position under the nose
of the tool and tighten the two hex bolts
of the magazine
7
and the hex bolt
the tool.
6. Reinsert battery pack.
nOTE: The tool will disable itself and not reset until the
battery pack has been removed and reinserted.
7. Reinsert nails into magazine (refer to Loading the Tool).
8. Release the pusher latch
9. Disengage the trigger safety lock‑off
continue nailing.
10. If nails become jammed in the nosepiece frequently,
have the tool serviced by an authorized D
service center.
Repairs
The charger and batteries are not serviceable. There are no
serviceable parts inside the charger or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including
brush inspection and replacement, when applicable)
should be performed by a factory service center or
an authorized service center. Always use identical
replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will help
you obtain more efficient warranty service in case there is
a problem with your product.
• COnFiRMATiOn OF OWnERshiP: In case of
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification
is required under the Federal Consumer Safety Act.
Register online at www.dewalt.com/account‑login.
Three‑Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at D
WALT Industrial Tool Co., 701 East
e
Joppa Road, Towson, MD 21286 or call 1‑800‑4‑D
(1‑800‑433‑9258).
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
provided, loosen the two
12
and the hex
7
18
at the top
19
on the foot of
.
8
2
when ready to
WALT
e
e
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1‑800‑4‑D
(1‑800‑433‑9258) for a free replacement.
WALT
English
WALT
e
13
Publicidad
