ISE SY-7020 Manual De Instalación E Instrucciones página 22

EN
Step 3:
As shown in the figure,
A. Install the parts (4) into the corresponding tube of the (1) main frame;
B. Rotate the (11) adjustment knob to the appropriate position simultaneously, please note
pull the parts (11) outward to make parts (4) can be moved up and down smoothly;
C. Adjust to a suitable position to suit the height and tighten the (11) knob;
D. please refer to the figure on the left and the method above to connect the parts (6) to the
frame, finally tighten the (24) knob;
6