momoDESIGN FGTR CLASSIC Manual Del Usuario página 10

B
D
E
10
To remove the visor, release the side cover
turning it anti-clockwise
A
Pull the fork
Repeat on the other side and remove the visor.
To install the visor, starting from one side of the
helmet, align the coupling holes
pins
C 3
Next, insert the pawl teeth
1
slots
F 4
Turn the side cover
other side of the helmet. Lower the visor and make
sure it is working properly.
N.B. If the visor does not work properly after
C
installation, please contact a Dainese service
point.
The helmet visor protects your eyes
from impacts with road debris,
2
insects or other small objects. If you
use the helmet without a visor, your
eyes will not be protected.
Before removing the visor in any
case check the laws (Highway Code)
C
in force in the territory in which
you are located, because it may
be prohibited to ride a motorbike
without eye protection.
3
F
4
.
1
out of the slider pins
B
D
.
into the specific
E
.
clockwise
A 5
5
by
A
.
C 2
with the slider
. Repeat on the