Publicidad
Idiomas disponibles
Idiomas disponibles
Before any maintenance or cleaning work, place the
pruning shears on a level surface, switch off the
machine and remove the battery.
The blade must be lubricated daily so that it does not run
out of oil.
Whenever you add oil, the blade must be in open position.
1. Place the shears in a horizontal position;
2. Use the supplied oil bottle (8) to add oil through the hole
by squeezing it;
3. Fit the battery (5) and press the trigger (7) a few times in
order to lubricate the entire blade.
Storage
Preparing storage for long periods is vital to avoid problems
and increase the service life of the brushless pruning
shears.
Store the pruning shears in a dry place. Avoid places with
high humidity to avoid the appearance of corrosion and
rust.
Make sure the machine is protected against misuse (for
example, by children).
Cleaning
The pruning shears must be thoroughly cleaned after each
use. Remove any waste accumulated in the blade. Careful
handling protects the machine and extends its service life.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
Make sure that the deactivated equipment is forwarded for
disposal in a technically correct way.
You can get information on the disposal of used pruning
shears from the responsible recycling authorities in your
municipality.
WhatsApp:
+351 967 817 569
E-mail:
support@vito-tools.com
Publicidad
