Uline H-8867C Instrucciones De Montaje página 2

3. For tabletops greater than 1" thick, insert
M6 x 35 mm screws (C) to underside of each
mounting bracket to attach bracket to tabletop and
tighten using 5 mm Allen wrench. Use M6 x 8 mm
short set screws (G) to secure bracket to tabletop
and tighten using 3 mm Allen wrench. (See Figure 3)
Figure 3
C
G
For 1" thick tabletops, use M6 x 20 mm screws (D)
to underside of each mounting bracket to attach
bracket to tabletop and tighten using 5 mm Allen
wrench. Use M6 x 8 mm short set screws (G) to
secure bracket to tabletop and tighten using 3 mm
Allen wrench. (See Figure 4)
Figure 4
D
G
PAGE 2 OF 6
ASSEMBLY CONTINUED
For tabletops less than 1" thick, use M6 x 35 mm
screws (C) to underside of each mounting bracket to
attach bracket to tabletop and tighten using 5 mm
Allen wrench. Use M6 x 15 mm long set screws (F) to
secure bracket to tabletop and tighten using 3 mm
Allen wrench. (See Figure 5)
Figure 5
π
1-800-295-5510
uline.com
C
F
NOTE: Do not overtighten screws.
Overtightening may damage underside of
tabletop.
0224 IH-8867C