All manuals and user guides at all-guides.com
troubleshooting
CHECK THESE POINTS IF YOUR DISHWASHER...
PROBLEM
ACTION
•
•
•
Does not start.
(Dishwasher doesn't
•
run)
•
•
•
•
•
•
•
•
Has odors.
•
Water remains after
•
a cycle has fi nished.
Make sure the door is latched and closed completely. Make sure the upper rack
is properly joined with the duct nozzle. Also, make sure the upper rack is properly
assembled with no imbalances.
Make sure the door is latched and closed completely. Press START before closing the
door.
Make sure the dishwasher is turned on and the door is closed completely. Make sure the
power cord is properly plugged into the wall outlet.
Make sure the power cord is connected properly.
Make sure the water supply is connected properly and the water is turned on.
The control panel may be locked. Make sure Control Lock is not activated.
A cycle may not be selected. Make sure a cycle is selected.
A circuit breaker is open. Reset the circuit breaker.
A fuse is blown. Replace the fuse. Disconnect any other appliances sharing the same
circuit with the dishwasher.
Apply detergent, and run the Normal cycle with no dishes inside.
Water remains from an incomplete cycle. Apply detergent without loading dishes, and run
the Normal cycle to clean the dishwasher.
The drain hose is obstructed. Contact a qualifi ed service technician to remove any
obstruction from the drain hose.
The dishwasher is not being used daily, or soiled dishes are left in the dishwasher too
long. With the dishwasher empty and no detergent, place a glass with 8 ounces of
vinegar upright into the lower rack, and then run a Normal cycle.
The drain hose is bent or clogged. Contact a qualifi ed service technician to remove any
obstruction from the drain hose.
English - 22