Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Abit Manuales
  4. Tarjeta Madre
  5. AN-M2
  6. Manual del usuario

Abit AN-M2 Manual Del Usuario

Ocultar thumbs

Publicidad

Enlaces rápidos

Descargar este manual
AN-M2
AN-M2HD
Motherboard
AMD Socket AM2
User's Manual
GeForce 7025/nForce 630a (AN-M2)
GeForce 7050PV/nForce 630a (AN-M2HD)
2000MT/s HT
Dual Channel DDR2 800
NVIDIA PureVideo™
NVIDIA nView™
HDMI (AN-M2HD) / DVI (AN-M2)
Gigabit LAN
SATA 3Gb/s RAID
USB 2.0 / IEEE1394 (AN-M2HD)
7.1-Channel HD Audio
abit SoftMenu™ Technology
Vista HW Ready

Publicidad

loading

Manuales relacionados para Abit AN-M2

Resumen de contenidos para Abit AN-M2

  • Página 1 GeForce 7025/nForce 630a (AN-M2) GeForce 7050PV/nForce 630a (AN-M2HD) 2000MT/s HT AN-M2HD Dual Channel DDR2 800 NVIDIA PureVideo™ NVIDIA nView™ HDMI (AN-M2HD) / DVI (AN-M2) Gigabit LAN SATA 3Gb/s RAID USB 2.0 / IEEE1394 (AN-M2HD) Motherboard 7.1-Channel HD Audio AMD Socket AM2 abit SoftMenu™...
  • Página 2 AN-M2/AN-M2HD User’s Manual English + Multilingual QIG P/N: 4310-0000-84 Rev. 3.00, April 2007 Copyright and Warranty Notice The information in this document is subject to change without notice and does not represent a commitment on part of the vendor, who assumes no liability or responsibility for any errors that may appear in this manual.
  • Página 3 Contents 1. Hardware Setup ............... 1-1 1.1 Specifications................1-1 1.1.1 AN-M2 ................1-1 1.1.2 AN-M2HD................1-2 1.2 Motherboard Layout ..............1-3 1.2.1 AN-M2 ................1-3 1.2.2 AN-M2HD................1-4 1.3 Choosing a Computer Chassis ............1-5 1.4 Installing Motherboard ..............1-5 1.5 Checking Jumper Settings.............
  • Página 4 4.17 Bahasa Malaysia//Panduan Pemasangan Ringkas ....... 4-17 4.18 ไทย//คู ่ ม ื อ การติ ด ตั ้ ง อย่ า งย่ อ ............4-18 4.19 繁體中文................. 4-19 4.19.1 規格：AN-M2..............4-19 4.19.2 規格：AN-M2HD ............. 4-20 4.19.3 快速安裝略說..............4-21 4.20 简体中文................. 4-22 4.20.1 规格：AN-M2..............
  • Página 5 1. Hardware Setup 1.1 Specifications 1.1.1 AN-M2 Expansion Slots • Supports Socket AM2 940 Processor • 1x PCI-E X16 slot with 2000MT/s system bus using Hyper • 1x PCI-E X1 slot Transport™ Technology • 2x PCI slots • Supports AMD CPU Cool ‘n’ Quiet...
  • Página 6 • 4x USB 2.0 connectors • 1x RJ-45 Gigabit LAN connector • Onboard Gigabit LAN abit Engineered Audio ™ • abit Softmenu Technology • Onboard 7.1-CH HD Audio CODEC RoHS • Supports auto jack sensing and S/PDIF • 100% Lead-free process and RoHS...
  • Página 7 1.2 Motherboard Layout 1.2.1 AN-M2 AN-M2/AN-M2HD...
  • Página 8 1.2.2 AN-M2HD The motherboard and its component layouts illustrated in the following chapter ※ of this manual were mainly based on model “AN-M2HD”, unless specifically stated. AN-M2/AN-M2HD...
  • Página 9 Install the motherboard with screws and have them tightened. To prevent shorting the PCB circuit, ※ please REMOVE the metal studs or spacers if they are already fastened on the chassis base and are without mounting-holes on the motherboard to align with. AN-M2/AN-M2HD...
  • Página 10 For incorrect CPU ratio/clock settings in the BIOS, press <Del> key to enter the BIOS setup menu right after powering on system. Set the CPU operating speed back to its default or an appropriate value. Save and exit the BIOS setup menu. AN-M2/AN-M2HD...
  • Página 11 Enter the BIOS setup menu. Reconfigure the setup parameters if necessary. CAUTION: Danger of explosion may arise if the battery is incorrectly renewed. ※ Renew only with the same or equivalent type recommended by the battery ※ manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions. ※ AN-M2/AN-M2HD...
  • Página 12 A minimum power of 300W or higher is recommended. ATX12V1: ATX 12V 4-Pin Power Connector This connector supplies power to CPU. The system will not start without connecting power to this one. AN-M2/AN-M2HD...
  • Página 13 • CPUFAN1: CPU Fan Power Connector • SYSFAN1: System Fan Power Connector • AUXFAN1~2: Auxiliary Fan Power Connector These fan connectors are not jumpers. DO NOT place jumper caps on these ※ connectors. AN-M2/AN-M2HD...
  • Página 14 CPU. The lever clicks when it’s locked into position. 3. The heatsink for CPU may have thermal interface material attached bottom. If not, applying a few squeeze of thermal paste to the CPU die will help to increase the contact. 1-10 AN-M2/AN-M2HD...
  • Página 15 ※ A higher fan speed will be helpful for better airflow and heat-dissipation. Nevertheless, stay alert to not touch any heatsink since a high temperature generated by the working system is still possible. AN-M2/AN-M2HD 1-11...
  • Página 16 DIMM module. Static electricity can damage the electronic components of the computer or ※ optional boards. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly. 1-12 AN-M2/AN-M2HD...
  • Página 17 Make sure to configure the “Master” and “Slave” relation before connecting ※ two drives by one single ribbon cable. The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. AN-M2/AN-M2HD 1-13...
  • Página 18 SATA device and connect the other end from the power supply. The motherboard in this photo is served for DEMO only, and may not be the ※ same type or model as the one described in this user’s manual. 1-14 AN-M2/AN-M2HD...
  • Página 19 I/O panel or the front-mounted IEEE1394 port of your chassis. Pin Assignment Pin Assignment TPA0 + TPA0 - Ground Ground TPB0 + TPB0 - +12V +12V Ground Make sure the connecting cable bears the same pin assignment. ※ AN-M2/AN-M2HD 1-15...
  • Página 20 Pin 4 “AVCC” of this header. Pin Assignment Pin Assignment (HD AUDIO) (AC’97 AUDIO) MIC2 L MIC In AGND MIC2 R MIC Power AVCC FRO-R Line Out (R) MIC2_JD F_IO_SEN FRO-L Line Out (L) LINE2_JD 1-16 AN-M2/AN-M2HD...
  • Página 21 The audio driver is originally configured to support HD Audio. For AC’97 audio connection, you may: Right-click the “Realtek HD Audio Manager” icon system tray. Click “Audio I/O” tab, and then click “Connector Settings”. Click “Disabled front panel jack detection”, and then click “OK” to confirm. AN-M2/AN-M2HD 1-17...
  • Página 22 VCC (5V) S/PDIF Out Ground 1.8.8 PCI and PCI Express X16, X1 Slots Install PCI Express X16 graphics card into slot “PCIEXP1”. Install PCI Express X1 cards into slot “PCIE1”. Install PCI cards into slots “PCI1”, and/or “PCI2”. 1-18 AN-M2/AN-M2HD...
  • Página 23 1.9 Onboard Indicators 1.9.1 Power Source Indicators • 5VSB: This LED lights up when the power supply is connected with power source. • VCC: This LED lights up when the system power is on. AN-M2/AN-M2HD 1-19...
  • Página 24 1.10 Connecting Rear Panel I/O Devices The rear I/O part of this motherboard provides the following I/O ports: AN-M2 AN-M2HD • Mouse: Connects to PS/2 mouse. • Keyboard: Connects to PS/2 keyboard. • OPT-OUT1: This connector provides an S/PDIF-Out connection through optical fiber to digital multimedia devices.
  • Página 25 In order to increase system stability and performance, our engineering staff is ※ constantly improving the BIOS menu. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see on your screen. AN-M2/AN-M2HD...
  • Página 26 This item selects the external clock frequency. Due to the specification limit of the CPU you installed, the speed you set over its standard bus speed is supported, but not guaranteed. PCIe Clock This item selects the clock frequency for PCI Express slot. AN-M2/AN-M2HD...
  • Página 27 This option allows you to switch between the default and user-defined voltages. Leave this setting at default unless the current voltage setting cannot be detected or is not correct. The option “User Define” enables you to select the following voltages manually. CPU Core Voltage DDR2 Voltage AN-M2/AN-M2HD...
  • Página 28 IDE HDD Auto-Detection Press Enter Item Help IDE Channel 1 Master Auto Access Mode Auto Capacity 0 MB Cylinder Head Precomp Landing Zone Sector :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults AN-M2/AN-M2HD...
  • Página 29 This item determines whether the system stops if an error is detected during system boot-up. [All Errors]: The system-boot will stop whenever the BIOS detect a non-fatal error. [No Errors]: The system-boot will not stop for any error detected. AN-M2/AN-M2HD...
  • Página 30 640K for systems with 640K or more memory size installed on the motherboard. Extended Memory This item displays the amount of extended memory detected during system boot-up. Total Memory This item displays the total memory available in the system. AN-M2/AN-M2HD...
  • Página 31 [Off]: The numeric keypad functions as arrow keys. Security Option This item determines when the system will prompt for password - every time the system boots or only when enters the BIOS setup. [Setup]: The password is required only when accessing the BIOS Setup. AN-M2/AN-M2HD...
  • Página 32 This item allows the BIOS to support some old or special IDE devices by prolonging this delay time. A larger value will give more delay time to the device for which to initialize and to prepare for activation. Full Screen LOGO Show This item determines to show the full screen logo when booting. AN-M2/AN-M2HD...
  • Página 33 For example: In a 256M selection with 256M total system memory size configuration, the BIOS utility will force it down to 128M automatically. In the applications that require higher frame buffer size, such as 3-D game, HDMI, or Blu-ray DVD playing, please select the option [256MB] for higher video performance. AN-M2/AN-M2HD...
  • Página 34 Phoenix – AwardBIOS CMOS Setup Utility OnChip IDE/SATA Device ► IDE/SATA Function Setup Press Enter Item Help ► RAID Configuration Press Enter :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults 2-10 AN-M2/AN-M2HD...
  • Página 35 Item Help x - SATA1 RAID Disabled x - SATA2 RAID Disabled x - SATA3 RAID Disabled x - SATA4 RAID Disabled :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults AN-M2/AN-M2HD 2-11...
  • Página 36 This item allows you to use the boot ROM (instead of a disk drive) to boot-up the system and access the local area network directly. Onboard FDD Controller This option enables or disables the floppy disk controller. (For AN-M2HD only) Onboard 1394 Controller This option enables or disables the IEEE 1394 controller. 2-12 AN-M2/AN-M2HD...
  • Página 37 Soft-Off condition. The PCI card must support the wake up function. Wake Up by OnChip LAN When set to [Enabled], access through the onchip LAN port can remotely wake up the system that was in Soft-Off condition. AN-M2/AN-M2HD 2-13...
  • Página 38 AC power failure occurs, the system will power-on when power returns. HPET Support This item selects to support the “High Precision Event Timer” (HPET), a new timer hardware for use by the system software when generating interrupts for thread schedulers, kernels, and multimedia timer servers. 2-14 AN-M2/AN-M2HD...
  • Página 39 This item determines whether the MPEG ISA/VESA VGA cards can work with PCI/VGA or not. [Enabled]: MPEG ISA/VESA VGA cards work with PCI/VGA. [Disabled]: MPEG ISA/VESA VGA cards do not work with PCI/VGA. Maximum Payload Size This item sets the maximum TLP payload size for the PCI Express devices. AN-M2/AN-M2HD 2-15...
  • Página 40 CPU FANEQ Control This item allows you to control the CPU fan speed. When set to [Enabled], the following items become selectable. CPU FanEQ Target Temp. This item sets the temperature mark for the “CPU FanEQ” function to take effect. 2-16 AN-M2/AN-M2HD...
  • Página 41 “SYS FanEQ Target Temp.” plus the value of item “SYS FanEQ Temp. Tolerance”, the speed ratio for the 3-pin fan assembly connected at “SYSFAN1” fan power connector will first run at the speed ratio set by the item “SYS FanEQ Start Control”, and then up to 100%. AN-M2/AN-M2HD 2-17...
  • Página 42 This option protects the BIOS configuration or restricts access to the computer itself. 2.12 Save & Exit Setup This option saves your selections and exits the BIOS setup menu. 2.13 Exit Without Saving This option exits the BIOS setup menu without saving any changes. 2-18 AN-M2/AN-M2HD...
  • Página 43 • [Utility]: Click to enter the utilities installation menu. • [abit Utility]: Click to enter the installation menu of utilities exclusively developed by abit. • Browse CD]: Click to browse the contents of this “Driver-&-Utility CD”. • Close]: Click to exit this installation menu.
  • Página 44 The installation screen appears. Follow the prompts on the screen to complete installation. After restarting the system, right-click the Sound Manager icon located at the desktop shortcut. Click item “Sound Manager”. The Realtek HD Audio Manager appears. 3-20 AN-M2/AN-M2HD...
  • Página 45 Click the [Audio I/O] tab. Click the pull down menu to select the channel configuration. Click [OK] button to apply the Audio I/O settings and exit. AN-M2/AN-M2HD 3-21...
  • Página 46 “Automatic Mode” for Cool ‘n’ Quiet to be enabled. 3.5 USB 2.0 Driver There is no need to install this driver for Windows 2000 with Service Pack 4, ※ Windows XP with Service Pack 1, or their later version. 3-22 AN-M2/AN-M2HD...
  • Página 47 The abitEQ is a self-diagnostic system that protects PC Hardware by monitoring critical items of Power Supply Voltage, CPU & System Fans Speed, and CPU & System Temperature. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [abitEQ] item. The following screen appears.
  • Página 48 3.7 FlashMenu (BIOS Update Utility) The FlashMenu is a utility to flash the BIOS in a more easily and quickly way. To install this utility: Click on the [abit Utility] tab in the installation menu screen. Click the [FlashMenu] item. The following screen appears.
  • Página 49 Save this selection and exit BIOS setup menu by accessing the BIOS menu “Save & Exit Setup”. Restart the system. The system will now boot from CD, and enter the ABIT Boot Manager, the following options appear (0) Boot From First HDD...
  • Página 50 3-26 AN-M2/AN-M2HD...
  • Página 51 • [SLED]: Connecte au câble de la DEL de veille. l’installation de votre carte mère abit. Pour des opérations plus • [PWR]: Connecte au câble de l’interrupteur de l’alimentation avancées, vous devez vous reporter à la version complète.
  • Página 52 Diese “Kurze Installationsanleitung” enthält nur die Anschlüsse auf der Vorderseite: [FPIO1] grundlegenden Hardwareinformationen, die Sie zur [HLED]: Kabelanschluss für Festplattenzugriffsanzeige. • Installation Ihres abit-Motherboards benötigen. Details [RST]: Kabelanschluss für Rücksetzschalter. • finden Sie im ausführlichen Handbuch. [SPKR]: Kabelanschluss für Kabelanschluss für •...
  • Página 53 • [PLED]: collega al cavo LED alimentazione. le informazioni di base sull’hardware necessarie all’installazione della scheda madre abit. Fare riferimento Collettore porta USB aggiuntiva: [FP-USB1], [FP-USB2] alla versione completa della guida per eseguire le Collettore porta IEEE1394 aggiuntiva: [FP-1394-1], [FP-1394-2] operazioni avanzate.
  • Página 54 [PWR]: Conecte el cable del interruptor de encendido. • durante la instalación de la placa base abit. Para conocer el [PLED]: Conecte el cable del LED de encendido. • funcionamiento avanzado, es necesario consultar la Terminal de puerto USB adicional: [FP-USB1], [FP-USB2] versión completa.
  • Página 55 à • [PWR]: Faz a ligação ao cabo do botão de alimentação. instalação da sua placa principal abit. Para mais • [PLED]: Faz a ligação ao cabo do LED do botão de alimentação.
  • Página 56 основная информация о техническом обеспечении, которая • [PLED]: Соединяется с кабелем индикатора питания. вам может понадобиться при установке материнской платы abit. Описание дополнительных операций вы найдете в Дополнительная насадка порта USB: [FP-USB1], [FP-USB2] полной версии руководства. Дополнительная насадка порта IEEE1394: [FP-1394-1], [FP-1394-2] Предостережения...
  • Página 57 4.7 Eesti//Kiirpaigaldusjuhend Käesolev “Kiirpaigaldusjuhend” sisaldab ainult [SLED]: Ühendage peatusindikaatori (Suspend LED) • abit-emaplaadi paigaldamiseks vajalikku riistvaraalast kaabliga. põhiteavet. Edasijõudnud kasutamiseks tuleb teil ikkagi [PWR]: Ühendage toitelüliti kaabliga. • pöörduda täisversiooni poole. [PLED]: Ühendage toiteindikaatori (Power LED) kaabliga. • Täiendav USB-pordi päis: [FP-USB1], [FP-USB2] Ettevaatusabinõud riistvara paigaldamisel...
  • Página 58 4.8 Latviski//Ātrās instalēšanas instrukcija Šī “Ātrās instalēšanas instrukcija” ietver tikai pamata [RST]: Pievieno atiestates slēdža kabeli. • norādes iekārtai, kas nepieciešamas, instalējot abit [SPKR]: Pievieno sistēmas skaļruņa kabeli. • mātesplati. Pilnīgākai darbībai nepieciešams iegūt [SLED]: Pievieno LED pārtraukšanas kabeli. •...
  • Página 59 [SLED]: Sujunkite su darbo pristabdymo indikatoriaus • informacija apie techninę įrangą, kurios jums gali prireikti kabeliu. instaliuojant pagrindinę plokštę abit. Papildomų operacijų [PWR]: Sujunkite su maitinimo tinklo jungiklio kabeliu. • aprašymą rasite pilnoje vadovo versijoje. [PLED]: Sujunkite su maitinimo indikatoriaus kabeliu.
  • Página 60 [SLED]: Podłączenie kabla diody LED wstrzymania pracy. • podstawowe informacje dotyczące sprzętu, wymagane [PWR]: Podłączenie kabla przełącznika zasilania. • podczas instalacji płyty głównej abit. Przy [PLED]: Podłączenie kabla diody LED zasilania. • zaawansowanych operacjach, niezbędne będzie skorzystanie z kompletnej wersji instrukcji.
  • Página 61 4.11 Magyar//Gyorstelepítési útmutató Ez a “Gyorstelepítési útmutató” csak azt az alapvető [PWR]: Csatlakoztassa a tápkapcsoló kábelhez. • hardver információt tartalmazza, amely az abit alaplap [PLED]: Csatlakoztasson a táp LED kábelhez • telepítéséhez szükséges. Az előrehaladott üzemeltetéshez, Kiegészítő USB port fejrész: [FP-USB1], [FP-USB2] továbbra is a teljes útmutatót kell használnia.
  • Página 62 4.12 Türkçe//Hızlı Kurulum Kılavuzu Bu “Hızlı Kurulum Kılavuzu”, abit anakartınızı takmanızda Ön Panel Konnektörleri: [FPIO1] gerekebilecek sadece temel donanım bilgisini içermektedir. [HLED]: Sabit Disk Sürücü LED kablosuna bağlayın. • İleri işlemler için daha geniş olan tam versiyonuna [RST]: Sıfırlama Anahtarı kablosuna bağlayın.
  • Página 63 ‫دﻟﻴﻞ اﻟﺘﺮآﻴﺐ اﻟﺴﺮﻳﻊ‬ ‫اﻟﻠﻐﺔ اﻟﻌﺮﺑﻴﺔ‬ 4.13 AN-M2/AN-M2HD 4-13...
  • Página 64 ‫راهﻨﻤﺎﯼ ﻧﺼﺐ ﺳﺮﻳﻊ‬ ‫ﻓﺎرﺳﯽ‬ 4.14 4-14 AN-M2/AN-M2HD...
  • Página 65 4.15 日本語//クイックインストールガイド • この「クイックインストールガイド」には、abit マ [SPKR]: システムスピーカーケーブルに接続 • [SLED]: サスペンド LED ケーブルに接続 ザーボードを取り付けるときに必要となるハードウ • [PWR]: 電源スイッチケーブルに接続 ェアの基本情報のみが含まれています。詳細な操作 • [PLED]: 電源 LED ケーブルに接続 については、その完全版を参照してください。 ハードウェアのセットアップに関する注意事項 追加 USB ポートヘッダ: [FP-USB1]、[FP-USB2] • ボードを取り付けたり設定を変更するときは、 事前に 追加 IEEE1394 ポートヘッダ: [FP-1394-1]、[FP-1394-2] 電源装置をオフにし、AC コンセントからプラグを必 ず抜いてください。 前面パネルオーディオ接続ヘッダ: [FP-AUDIO1] •...
  • Página 66 4.16 한국어//빠른 설치 가이드 본 “빠른 설치 가이드”는 빅빔 abit 메인보드 • [SPKR]: 시스템 스피커 케이블에 연결하세요. [SLED]: 유휴(Suspend) LED 케이블에 연결하세요. • 설치에 필요한 중요한 하드웨어 정보만을 • [PWR]: 전원 스위치 케이블에 연결하세요. 포함하고 있습니다. 보다 상세한 정보 및 과정은...
  • Página 67 • maklumat perkakasan asas yang anda mungkin perlu [SPKR]: Sambungkan ke kabel Sistem Pembesar Suara. • semasa memasang papan induk abit anda. Untuk [SLED]: Sambungkan ke kabel Gantung LED. • pengendalian lanjutan, anda perlu rujuk ke versi [PWR]: Sambungkan ke kabel Suis Kuasa.
  • Página 68 เป็ น เพี ย งข้ อ มู ล พื ้ น ฐานที ่ จ ำเป็ น ใน [SPKR]:ต่ อ เข้ า กั บ สายลำโพงของระบบ • การติ ด ตั ้ ง แผงวงจรหลั ก abit ของคุ ณ เท่ า นั ้ น กรุ ณ า [SLED]:ต่ อ เข้ า กั บ สาย LED •...
  • Página 69 4.19 繁體中文 4.19.1 規格：AN-M2 處理器 擴充插槽 • 支援採用 Hyper Transport™技術、 • 1 個 PCI-E X16 插槽 2000MT/s 系統匯流排的 AMD Socket • 1 個 PCI-E X1 插槽 AM2 940 處理器 • 2 個 PCI 插槽 • 支援 AMD CPU Cool ‘n’ Quiet 技術...
  • Página 70 音效 • 1 個 RJ-45 Gigabit 網路接頭 • 支援 7.1 聲道 HD 音效 abit Engineered • 支援自動插孔偵測以及 S/PDIF 音源輸出 ™ • abit SoftMenu 技術 Serial ATA RoHS • 4 組 SATA 3Gb/s 支援 SATA RAID 0、1、 0+1、5 及 JBOD 功能...
  • Página 71 4.19.3 快速安裝略說 本「快速安裝略說」僅包含安裝 abit 主機板時所需的 附加的 USB 連接埠接頭：[FP-USB1]、[FP-USB2] 基本硬體資訊。詳細的操作方式，仍請參閱其完整的 除了位於 I/O 面板上的內建 USB 接頭外 ， 您可透過帶有 手冊版本。 支架的延長線，連接這些各有兩個附加 USB 連接埠的 接頭。 硬體安裝注意事項 附加的 IEEE1394 連接埠接頭：[FP-1394-1]、[FP-1394-2] • 安裝機板或變換任何設定之前，請先關閉電源並拔 除了位於 I/O 面板上的內建 IEEE1394 接頭外，您可透 掉電源插頭。 過 帶 有 支 架 的 延 長 線 ， 連 接 這 些 各 有 一 個 附 加...
  • Página 72 4.20 简体中文 4.20.1 规格：AN-M2 处理器 扩充插槽 • 支持采用 Hyper Transport™ （超传输） 技 • 1 个 PCI-E X16 插槽 术、2000MT/s 系统总线的 AMD Socket • 1 个 PCI-E X1 插槽 AM2 940 处理器 • 2 个 PCI 插槽 • 支持 AMD CPU Cool ‘n’ Quiet （降温静音）...
  • Página 73 • 主板内建 Gigabit 网络 • 1 个 RJ-45 Gigabit 网络接头 音效 abit Engineered • 支持 7.1 声道 HD 音效 ™ • abit SoftMenu 技术 • 支持自动插孔侦测以及 S/PDIF 音源输出 RoHS 串行 ATA • 100%无铅工艺，符合 RoHS 规范 • 4 组 SATA 3Gb/s， 支持 SATA RAID 0、 1、...
  • Página 74 4.20.3 快速安装略说 [PLED]：连接电源 LED 电缆。 本“快速安装略说”仅包含基本的硬件信息，供您在 • 安装 abit 主板时进行参考。如需了解高级操作，仍请 附加的 USB 端口接头：[FP-USB1]、[FP-USB2] 参阅其完整的手册版本。 除了位于 I/O 面板上的板载 USB 连接器外 ， 这些接头可 以通过带线卡的延长电缆分别提供两个附加的 USB 端 硬件设置注意事项 口连接。 • 在安装主板或更改任何设置前，务必关闭电源并从 附加的 IEEE1394 端口接头：[FP-1394-1]、[FP-1394-2] 交流插座上拔掉电源线。 除了位于 I/O 面板上的板载 IEEE1394 连接器外，这些 • 从防静电袋中取出主板前，应戴上静电安全腕带以 接头可以通过带线卡的延长电缆分别提供一个附加的...
  • Página 75 If the situation remains the same, try Step 3. Step 3. The same procedure as Step 2, but while discharging the CMOS data, pull out the ATX power connectors from motherboard and remove the button battery during CMOS discharge. AN-M2/AN-M2HD...
  • Página 76 Example: Intel 650 3.4GHz (OC FSB=220MHz) • Memory brand: Type in the brand and model name of your memory module. Example: Memory brand: Kingston (KVR533D2N4/1G) • Memory size: Type in the size of your memory module. Example: 512M* 4PCS AN-M2/AN-M2HD...
  • Página 77 See the next page for a blank Technical Support Form, or visit our website to fill in the form on line (http://www.abit.com.tw/page/en/contact/technical.php). Q. Is the motherboard dead? Do I need to return it to where I bought from or go...
  • Página 78 5.1.2 Technical Support Form Region: E-mail: First name: Last Name: Subject: Motherboard: BIOS Version: CPU: Memory brand: Memory size: Memory configuration: Graphics card: Graphics driver version: Power supply maker: Power supply wattage: Storage devices: Optical devices: Other devices: Operating system: Problem description: AN-M2/AN-M2HD...
  • Página 79 Universal ABIT (USA) Corporation 2901 Bayview Drive, Shanghai Fremont, CA 94538, U.S.A. Tel: 1-510-623-0500 Universal ABIT (Shanghai) Co. Ltd. Fax: 1-510-623-1092 FL 19 Xuhui Yuan BLOG NO.1089 Website: http://www.abit-usa.com ZhongShan s 2 RD, ShangHai 200030 The People's Republic of China Latin America: r aymond@abit-usa.com...
  • Página 80 P/N: 4310-0000-84 Rev. 3.00...

Este manual también es adecuado para:

An-m2hd